Virtual Synchronoscope for Connecting Synchronous Generator on the Grid
Journal Title: ANALELE UNIVERSITATII DIN CRAIOVA - Seria Inginerie electrica - Year 2015, Vol 39, Issue 39
Abstract
In this paper is presented in a constructive and functional way an instrument that can be used at connecting synchronous generators at the grid supply that has a constant voltage and frequency. Actually it is about a virtual synchronoscope that verifies the correct instant for the synchronization: phase sequence of the generator must be same with the grid, the generator frequency must be equal to the grid frequency, the generator voltages should be equal to the corresponding grid voltages and the generator voltages should be in phase with the corresponding grid voltages. After the conditions of synchronization between synchronous generator and large power grid are occur, the parallel operation of generator is realized automatically. The virtual synchronoscope is designed from two principal components: hardware (LEMs transducer for measurement six voltages, supply voltage, elements for input/output signals conditioning, USB multifunction I/O module) and software (virtual instrument). The main objective of this paper is to create aneasy to use device for the study of network synchronization synchronous generators. The LabVIEW graphical programming environment is used for designing virtual instrument. The monitored parameters values are displayed using digital indicators. The real-time voltage waveforms for grid and generator are displayed. With three-phase voltage phasors (voltage vectors) we can see the evolution of phase angles and voltages amplitude. This virtual synchronoscope can be used in engineering education from universities or intesting laboratories of electrical machines.
Authors and Affiliations
Gheorghe-Eugen Subtirelu, Mircea Dobriceanu, Monica-Adela Enache
Keywords
Related Articles
- EP ID EP128095
- DOI -
- Views 139
- Downloads 0
POSSIBILITY FOR STUDY OF THE RELUCTANCE SYNCHRONOUS MOTORS DYNAMIC REGIMES
This paper presents a possibility for studying the dynamic regimes of the reluctance synchronous motors. There are detailed the mathematical model and the graphics obtained by simulation in certain dynamic regimes....
Power Control Assessment in Induction Heating Systems with Voltage Source Inverter and Resonant L-LC Load
The attention in this paper is directed to the power control in an induction heating system for seamless pipes consisting of a single-phase voltage source inverter with L-LC resonant load supplied by a three-pha...
Technical and Economic Analysis of Thermal Energy Storage in the Biomass CHP Plants with ORC Technology
The investments in units of electricity production from the renewable energy sources have an increasing trend in the European Union countries. The production of elec-tricity from renewable energy sources and cogeneration...
On the Immunity of Data Acquisition Systems Used in Power Systems
The paper deals with some tests regarding the immunity for radiated emissions and compliance with international standards for electromagnetic compatibility (EMC) measurements for an industrial data acquisition system (DA...
Magneto-Thermal Model for Crimped Connections
In this paper numerical results coresponding to thermal regime of two types of superposed crimped connections has been obtained. The samples studied use copper wire crimped by two methods: the first method uses...