Non contactActive Vibration control of Cantilever Beam Using Neural Networking
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2016, Vol 4, Issue 2
Abstract
The aim of this study is to propose an active non-contact vibration damper to minimize the amplitude vibration of structure. The damper is made of an electromagnet. A neural network control system is proposed in this study to control the current flow through the coil of the electromagnet. The vibration of a cantilever beam type structure is controlled in this study using the proposed electromagnetic actuator. The electromagnet is placed just below the free end of the cantilever beam. The direct current is passed through the coil of the electromagnet during the upward motion of the beam. During the downward motion of the beam the current through the coil of the electromagnet is switch off. Therefore during the upward motion of the beam an attractive force will be applied on the beam which will try to minimize the amplitude of vibration of the structure. In this study it is shown that the non contact damper.
Authors and Affiliations
Ms. Srishti Srivastava, Dr. Sankha Bhaduri
Keywords
Related Articles
- EP ID EP21636
- DOI -
- Views 211
- Downloads 4
Embedded Voice Controlled Computer For Visually Impaired and Physically Disabled People Using Arm Processor
This paper gives the design and implementation of embedded voice controlled system using ARM cortex A7 for visually impaired and physically challenged people. ARM cortex A7 has features such as low power consuming than...
CFD Analysis of Conical Coil Tube Heat Exchanger with Varying Cone Angle
Now-a-days heat exchangers have become indispensable in various fields of engineering such as in air conditioning, power stations, chemical plants, automobiles, etc. It necessitates the compact size along with the high...
Security in Cloud Computing - A Review
In modern computing, Cloud computing is an important part of any small or large organization. Today cloud computing can be considered as a service, similar to the way that electricity is considered a service in urban ar...
Design and Analysis of Car Disc Brake by Using FEM
Braking is a process which converts the kinetic energy of the vehicle into mechanical energy which must be dissipated in the form of heat. The disc brake is a device for deaccelerating or stopping the rotation of a whee...
Induction Motor Fed By Γ Z- Source Inverter
The main focus is on the losses that occur in an Induction motor and to select a suitable Inverter that feeds the Induction motor. Various analysis are performed on the different types of Inverters and on completion of...