NonConformities Analysis in the Industrial Manufacturing Processes
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2018, Vol 41, Issue 3
Abstract
The current article presents the identification, treatment method and encoding of causes that generate defects and types of non-conformities encountered during the manufacturing process in industry. The analysis is performed periodically: monthly, quarterly, yearly, compared to the results of previous similar periods. This process is the basis for establishing the necessary corrective/ preventive measures. The purpose of this study is to show how to achieve data centralization needed to prevent non-quality.
Authors and Affiliations
Elena-Mădălina MILITARU (BRATU), Roxana Alexandra GHEȚA, Andrei-Valentin BRATU, Gabriel Marius DUMITRU, Gabriel IACOBESCU
Keywords
Related Articles
- EP ID EP623300
- DOI 10.35219/mms.2018.3.06
- Views 56
- Downloads 0
Some Aspects Regarding the Influence of the Tribologycal Factors on the Superficial Layers of Treated Steels with Plasma Nitriding
Some 38MoCrAl09 (SAE 4038) steel grade samples were subjected to plasma nitriding treatment regimes. The structural and diffractometric aspects of the superficial layers of the steel are studied after the wear tests by f...
Functional Model of Savonius Type Vertical Axis Wind Turbine with Periodic Coupling of Adjacent Vertical Blades
The field of HAWT (Horizontal Axis Wind Turbines) regarding the use of wind energy (WE) as a renewable energy source (RES) is well researched and the results are covering both the power range and efficiency. Deficiencies...
Hardened Aluminum with Oxide Particles
The paper presents the effect of size and dispersion degree of the particles of aluminum oxide, on structure, mechanical characteristics and phenomena that take place when heating at different temperatures for recrystall...
Nanostructured SiC-Ni Composite Coatings Obtained By Electrodeposition – A Tribocorrosion Study
The tribocorrosion properties of SiC (20nm) - Ni nanostructured coatings have been studied in pin on disc tribocorrosimeter connected with an electrochemical cell. The objectives of our study in principal is to fully und...
Obtaining and Characterization of Vitroceram by Chemical Doped ZnO for Art Mosaic
This paper presents the obtaining and the characterization of ZnO doped vitroceramic, used as photo and termoresistive pigment for art mosaic. The coprecipitation involves two sequential steps, first of ions Zn2+(aq), Cr...