Numerical analysis of soil bearing capacity by changing soil characteristics
Journal Title: Frattura ed Integrità Strutturale - Year 2009, Vol 3, Issue 10
Abstract
In this research work by changing different parameters of soil foundation like density, cohesion and foundation depth and width of square foundation at angle of friction of 0° to 50°with increment of 5°, numerically safe bearing capacity of soil foundation is calculated and it is attempted to assess economical dimension of foundation as well as understanding variation range of bearing capacity at different degree. It could help of civil engineering in design of foundations at any situation.
Authors and Affiliations
A. Namdar, M. K. Pelko
Keywords
Related Articles
- EP ID EP85973
- DOI 10.3221/IGF-ESIS.10.05
- Views 122
- Downloads 0
Measurement and simulation of strain fields around crack tips under mixed-mode fatigue loading
For various configurations examined in a series of fatigue experiments on thin-walled tubes under tension and torsion, the experimental results – crack path, crack growth life, near crack tip deformations, and cr...
Characterization of fracture properties of thin aluminum inclusions embedded in anisotropic laminate composites
The fracture properties of thin aluminum inclusions embedded in anisotropic paperboard composites, of interest for food and beverage packaging industry, can be determined by performing tensile tests on non-conventi...
Investigation of very high cycle fatigue by thermographyc method
Nowadays, many components and structures are subjected to fatigue loading with a number of cycles higher than 107. In this scientific work, the behaviour of two kinds of tool steel was investigated in very high cy...
Combined lock-in thermography and heat flow measurements for analysing heat dissipation during fatigue crack propagation
During fatigue crack propagation experiments with constant force as well as constant stress intensity lock in thermography and heat flow measurements with a new developed peltier sensor have been performed. W...
Fractography as a tool to assess the occurrence of fatigue fractures in complex microstructure structural components
Fractographic assessment of fatigue fractures may be difficult if they occur in metallic components characterized by low ductility complex microstructures. In these cases reconciliation of known fatigue ruptu...