Numerical Investigation of Fluid Flow and Heat Transfer Inside a 2D Enclosure with Three Hot Obstacles on the Ramp under the Influence of a Magnetic Field
Journal Title: Engineering, Technology & Applied Science Research - Year 2017, Vol 7, Issue 3
Abstract
This paper focuses on solving the fluid flow and heat transfer equations inside a two-dimensional square enclosure containing three hot obstacles affected by gravity and magnetic force placed on a ramp using Boltzmann method (LBM) applying multiple relaxation times (MRT). Although, the Lattice Boltzmann with MRT is a complex technique, it is a relatively new, stable, fast and high-accurate one. The main objective of this research was to numerically model the fluid flow and ultimately obtaining the velocity field, flow and temperature contour lines inside a two-dimensional enclosure. The results and their comparisons for different types of heat transfer revealed that free or forced heat transfer has a considerable impact on the heat transfer and stream lines. This can be controlled by modifying the Richardson number. It is revealed that changing the intensity of the magnetic field (Hartman number) has an appreciable effect on the heat transfer.
Authors and Affiliations
M. M. Keshtkar, M. Ghazanfari
Keywords
Related Articles
- EP ID EP146370
- DOI -
- Views 242
- Downloads 0
Behavior of Corrosion of a Heat Pipe Cooling Device in a Computer
The aim of this study was to perform life testing and to determine the effect of working time on the corrosion of a heat pipe used for cooling in a computer. The heat pipe was made from a copper tube. The heat pipe consi...
Adaptable Web Prediction Framework for Disease Prediction Based on the Hybrid Case Based Reasoning Model
Nowadays, we are witnessing the rapid development of medicine and various methods that are used for early detection of diseases. In order to make quality decisions in diagnosis and prevention of disease, various decision...
A Numerical Simulation Approach for Sunspot Area Calculation
The aim of this paper is the numerical simulation of the sunspot area (SSA) and its location on the walls and on the floor of a room with a single window facing south. The input parameters of the calculation code are the...
On the Nature of Superconducting Precursors in Bi-Pb-Sr-Ca-Cu-O Compositions Fabricated by Hot Shock Wave Consolidation Technology
In this paper, the possibility of critical temperature increasing of superconducting precursor Tс and the current bearing capacity in samples of Bi-Pb-Sr-Ca-Cu-O superconducting system fabricated using hot shock wave con...
Air Distributor Designs for Fluidized Bed Combustors: A Review
Fluidized bed combustion (FBC) has been recognized as one of the suitable technologies for converting a wide variety of biomass fuels into energy. One of the key factors affecting the successful operation of fluidized be...