Numerical Investigation on Heat Enhancement Method with Using Circular Dimpled Tube
Journal Title: Mehmet Akif Ersoy Üniversitesi Uygulamalı Bilimler Dergisi - Year 2019, Vol 3, Issue 1
Abstract
In this study, the effect of dimpled tube which is heated with constant heat flux on heat transfer enhancement is numerically investigated Using physically enhanced tube is one of the passive heat transfer enhancement methods. The reason of using dimpled tube is increase turbulence through the tube and destruct the thermal boundary layer. The numerical study is validated with an experimental study and configurations of cases are expanded with chancing pitch length. The considered cases are conducted in Reynolds number range of 3000 to 8000. Used fluid through the flow and its material copper are selected as water and copper, respectively. The k- ε RNG turbulence model is used to simulate turbulent flow adjacent the inner wall surface. The analyses are determined with Nusselt number (Nu), friction factor (f) and performance evaluation criteria (PEC). The highest Nusselt number and the minimum friction factor is obtained when the Reynolds number of 8000, as 135.54 and 0.0422, respectively, for pitch length of 10 mm and 80 mm.
Authors and Affiliations
Toygun DAGDEVIR, Orhan KEKLIKCIOGLU, Veysel OZCEYHAN, Sibel GUNEŞ
International Capital Controls, A Literature Investigation on Capital Control Applications of European and Asian Countries
The protectionist and intrusive approach, which is a result of the Keynesian thinking that has influenced international markets from 1929 to 1970, has now been replaced by more liberal and openly functioning markets. Whi...
Kurs Oranı ve Artık Gaz Kesrinin Otto Çevrimli Bir Motorun Performansına Etkisi
The finite time thermodynamics (FTT) model is often used to study the design parameters of internal combustion engines in a practical way. In this study, the effects of stroke ratio and residual gas fraction on the perfo...
Comparison of Different Normalization Techniques on Speakers’ Gender Detection
In this study, the effect of Short-time Mean and Variance Normalization (STMVN), Shorttime Cepstral Mean and Scale Normalization (STMSN), Min-Max Normalization, Z-Score Normalization and Standard Deviation Normalization...
Uluslararası Ticaretin Ekonomik Gelişme Üzerinde Etkileri: Gelişmiş ve Gelişmekte Olan Ülkeler için Bulgular
Bu çalışmada, ülkelerin ekonomik gelişmişlikleri ve ticari açıklığı arasındaki ilişki ampirik olarak incelenmiştir. 2010-2016 döneminde 28 gelişmiş ve 30 gelişmekte olan ülke için panel veri analizi kullanılarak bulgular...
Ortaöğretim Kurumları Fizik Eğitiminde Öğrenme Güçlüklerinin Belirlenmesi
Bu çalışmanın amacı ortaöğretim fizik eğitiminde öğrenme güçlüğünün belirlenmesidir. Araştırma, ortaöğretim fizik eğitiminde öğrenme güçlüklerini belirlemek için orta öğretimden yeni mezun olan Kırıkkale Üniversitesi Eği...