NUMERICAL MODELLING OF THE STRENGTHENING PROCESS OF STEEL-CONCRETE COMPOSITE BEAMS

Journal Title: Civil and Environmental Engineering Reports - Year 2015, Vol 4, Issue 19

Abstract

This paper presents the numerical modelling of strengthening a steel-concrete composite beam. The main assumption is that the strengthening is not the effect of the state of a failure of a structure, but it resulted from the need to increase the load-bearing capacity and stiffness of the structure (for example: due to a change in the use of the object). The expected solution is strengthening without the necessity to completely unload the structures (to reduce the scope of works, the cost of modernization and to shorten the time). The problem is presented on the example of a composite beam which was strengthened through welding a steel plate to the lower flange of the steel beam. The paper describes how energy parameters are used to evaluate the efficiency of structures’ strengthening and proposes an appropriate solution.

Authors and Affiliations

Piotr SZEWCZYK, Maciej SZUMIGAŁA

Keywords

Related Articles

Transformation of an industrial facilities – revitalisation or adaptation

At the turn of the century Polish cities witnessed radical changes due to the political, economic and social transformations which resulted in the technical, social, and cultural degradation of the existing former indust...

STATE OF THE ART IN TECHNOLOGIES OF THE BIOGAS PRODUCTION INCREASING DURING METHANE DIGESTION OF SEWAGE SLUDGE

At present many WWTPs are focused on increasing quantity of biogas generated during sewage sludge processing. Various disintegration methods can be used for this purpose – thermal heating, ultrasonic disintegration, chem...

Coking plant wastewater treatment in integrated systems combining volume coagulation and advanced oxidation with pressure membrane techniques

The article compares the efficiencies of coke plant wastewater treatment in the integrated systems that combine physicochemical and chemical purification methods with ultrafiltration and reverse osmosis. The wastewater t...

EXPERIMENTAL STUDY ON STEEL TANK MODEL USING SHAKING TABLE

Cylindrical steel tanks are very popular structures used for storage of products of chemical and petroleum industries. Earthquakes are the most dangerous and also the most unpredictable dynamic loads acting on such struc...

RANGES OF BACKWATER CURVES IN LOWER ODRA

In the paper, the backwater curve ranges at the mouth of the Odra River with changing boundary conditions were analysed. The aim of the study is to determine which boundary condition, i.e. stage of lower cross-section or...

Download PDF file
  • EP ID EP242356
  • DOI -
  • Views 69
  • Downloads 0

How To Cite

Piotr SZEWCZYK, Maciej SZUMIGAŁA (2015). NUMERICAL MODELLING OF THE STRENGTHENING PROCESS OF STEEL-CONCRETE COMPOSITE BEAMS. Civil and Environmental Engineering Reports, 4(19), 99-110. https://europub.co.uk./articles/-A-242356