Numerical Simulation of Mixing of Effluent through Porous Media: The Effects of Local Inertia on the Flow
Journal Title: Mehran University Research Journal of Engineering and Technology - Year 2018, Vol 37, Issue 2
Abstract
The steady–state analytical and numerical solutions are obtained for the mixing of effluent with Newtonian fluid in subsurface. The problem presented in this research work is flow through a channel packed by homogeneous porous media, associated to environmental sciences. Simulations are performed employing a time–marching scheme. Numerical method used in the study is a finite element method, while, the frame of reference is Cartesian coordinate system. Adopted algorithm follow semi-implicit technique through Taylor-Galerkin/Pressure-correction scheme. Analytical solution is Obtained and compared with the numerical predictions. Impact of Darcy’s number, influence of change in diffusion coefficient of effluent concentration and time dependent effects of velocity profile is investigated. Numerical predictions are compared against both steady–state and time–dependent analytical solutions obtained in the present study, and observed very good agreement. Various interesting features of the flow are reported. The numerical results exhibit that with increasing fluid inertia, the effluent disperses immediately in flow field when entering from same direction with the flow of fluid. While, increasing dispersion coefficient of effluent at fixed rate of inertia the effluent disperses faster and occupy large area of upstream.
Authors and Affiliations
Zulqarnen Asadullah Khoso Baloch, Abdul Latif Qureshi, Abdul Razaque Sahito, Ahsanullah Baloch
Securing Gateways within Clustered Power Centric Network of Nodes
Knowledge Networks are gaining momentum within cyber world. Knowledge leads to innovation and for this reason organizations focus on research and information gathering in order to gain and improve existing knowledge. Thi...
Synthesis of Cuprous Oxide Nano Cubes and Platelets Using Both Electrodes of Copper
Cu2O (Cuprous Oxide) is usually produced using expensive electrodes such as platinum, graphite, etc. In the present study, it is shown that Cu2O nanostructures can be synthesized by electrolysis using copper as both anod...
Identifying the Wasted Spaces within Hospital Buildings in Pakistan
The built environment of hospital buildings are generally not accepted to be pleasant. In the design of healthcare facility, it is quite important that its design, spatial arrangement and areal distribution must respond...
Analysis of Caustic Soda of Different Manufacturers in Pakistan for Mercerization of Cotton Textiles
Pakistan has sufficient production capacity of caustic soda to cater the needs of the local industry. Presently, Pakistan has four major plants with production capacity around 435,000 mega ton per year of caustic soda of...
Adaptation of Information Quality and Assurance Management Paradigm in a Strategic Public Sector Organization
Information quality despite being a critical area in organizations lacks in comprehensive methodologies for its adaptation and improvement even after years of active research and practice. Therefore adaptation of informa...