On peculiarities of regulation of electric drive with two-mass mechanical part and non-linear load
Journal Title: Електромагнітна сумісність та безпека на залізничному транспорті - Year 2018, Vol 1, Issue 16
Abstract
The article is dedicated to the regulation of regulation of the speed of the electric drive. It is noted that the main way of imparting astatic properties to an automatic system is to use integrat-ing corrective devices-regulators. The phenomenon of parametric astatism is established and the conditions for its occurrence are found. The phenomenon of parametric astatism in a complex electromechanical system of speed control for an AC electric drive with an asynchronous motor and vector control is considered. It is shown that parametric astatism takes place in two-mass electric drives of direct and alternating current with a constant and variable as a function of the load speed, provided that the control part of the system is synthesized using root methods. This applies to systems of modal control and systems where the synthesis of low-order rate controllers is based on the polynomial method. It is determined that the majority of the standard distribu-tions considered above allow one to obtain parametric astatism in the system.
Authors and Affiliations
L. Akimov, A. Nikolenko, V. Kuznetsov, B. Biliy, S. Prokopenko
Keywords
Related Articles
- EP ID EP618557
- DOI 10.15802/ecsrt2018/172664
- Views 100
- Downloads 0
Model inductive sensor for monitoring road vehicle within railway crossings
The model of the inductive sensor is considered to control availability of road vehicles within railway crossings at the movement of the train. Actuality of work. When the automatic crossing alarm system is activated, s...
AN OVERVIEW OF THE ETCS BRAKING CURVES
The purpose of the article is to present an overview of the ETCS braking curves according to the European specifications. Though the ETCS specifications lay down the basic principles for the braking curves and the assoc...
Modeling of electromechanical systems
Real time systems mode and transmit data on the instantaneous state of the control objects can timely detect any faults and thus provide additional time for their correction by railway em-ployees. Turnouts are one of the...
Experimental determination of the zone of lightning protection
Goal. Explore the possibility of determining the zone of protection of lightning rod shafts un-der laboratory conditions. Urgency of work. Taking into account that protection of isolation of equipment of traction substat...
Remote wireless radiation monitoring system
The remote wireless radiation monitoring system in the composition of four functional blocks is considered: the radioactive radiation sensor on the new dosimeter SBM-20; powerful micro-controller ChipKIT; cloud-based ser...