. On the aerodynamic optimization of impellers of supersonic compressor stages.
Journal Title: Технічна механіка, Техническая механика, Technical Mechanics - Year 2016, Vol 2, Issue 2
Abstract
The study deals with the pressing problem of diminution in the computer time for an aerodynamic optimization of blade rims of axial compressors when a numerical simulation of the flow based on the full averaged Navier-Stokes equations is used for calculating the end function. The work goal is to verify the serviceability of the authors’ saving procedure of the aerodynamic optimization of impellers of the supersonic compressor stages. The procedure uses reasonably crude computational grids in a numerical simulation of a 3D turbulent air flow in impellers. However, these grids would be selected in order to save the sensitivity of the computational results to variations in the geometric parameters of a blade rim. Criteria of quality are formulated as air flow-averaging values of the power characteristics of an impeller. Finding the optimal geometric parameters of blades uses the points of the uniformly distributed sequences in space of parameters. The Rotor-37 impeller of a supersonic compressor stage has been selected for computations for verifying the serviceability of the procedure. Using the mentioned high-loaded impeller as an example, it is shown that in comparison with the prototype the improved combinations of the variable geometric parameters of impeller blades can be selected by employing a moderate number of the points of the uniformly distributed sequences. The validity of this conclusion is supported by the following calculation of the power characteristics of the reference impeller and optimized one using a detailed computational grid. The results obtained can be employed for the aerodynamic optimization of the geometric parameters of blade rims of compressor stages.
Authors and Affiliations
Yu. Kvasha, N. Zynevich
Keywords
Related Articles
- EP ID EP352413
- DOI -
- Views 97
- Downloads 0
Analysis of the effect of turbulent viscosity models on the calculation of rocket engine combustion product jet flows
This paper reports the results of calculations of turbulent gas jet flows with the use of an algebraic turbu-lence model ( Safronov’s model) and two one-parameter differential turbulence models (Sekundov’s model and the...
Estimation of the reliability of complex information systems with cross cou-pling
The problems of evaluation of complex telecommunication- information systems with a plurality of cross communications are examined. A new approach to an analytical evaluation of the reliability was proposed including pr...
Nonnuclear rocket deterrence forces: challenges of creation and approaches to solution
The role of nonnuclear missile armament in creation of the deterrent forces for the Armed Forces of Ukraine is highlighted. The results of analysis of the domestic Tactical Missile System (TMS) development are presented....
Simulation of emergency collision of passenger train equipped with passive safety system with obstacle
Rail incidents take place throughout the world. Constant improvement of precautions does not alleviate problems of safe traffic. Because of this, the development and creation of railway new-generation vehicles with effic...
Determination of parameters of cavitation self-oscillation in hydraulic system under simultaneous longitudinal oscillation of pipe structure and fluid
The paper deals simultaneous longitudinal oscillation of feed pipes of liquid rocket engines (LRE) and flu-ids. Cavities, normally occurring in operations of LRE pumps, can result in self-excited low-frequency of the flu...