Operational properties and local wear mechanisms of hard alloys alloyed by tungsten nano carbide under turning
Journal Title: Вісник Тернопільського національного технічного університету - Year 2015, Vol 79, Issue 3
Abstract
Operational properties of the titanium carbide based hard alloys alloyed by vanadium carbide (5% (wt.) and tungsten nano carbide (5, 10, 15% (wt.) with nickel-chromium binder (18% (wt.) under turning were researched in the paper. The processing of construction carbon and alloyed steels under shoulder and facing turning by inserts made of developed alloys was carried out. The tool life at semi- finishing and finishing turning operations was identified and the critical (maximum) cutting speed at which the critical inserts wear takes place was determined. It was shown that the application of tungsten nano carbide results in the increase of cutting tools wear resistance as the alloys with nano WC tool life is 109…154 min and exceeds that of conventional carbide based hard alloys, tungsten-free hard alloys and polycarbide based alloys alloyed with fine-grained tungsten carbide. The critical cutting speed the alloy with 5% (wt.) nano WC is 830 m/min and for the one with 15% (wt.) is 980 m/min. The features of local wear of alloys alloyed by tungsten nano carbide were studied taking advantage of the electronic microscopy and chemical analysis methods. The analysis of the wear zone showed that it consists of two areas, the tribolayer, containing a significant amount of oxygen and the elements of instrumental and processed materials, and abrasive wear area. It was determined that the abrasion wear is the main local wear mechanism of researched alloys. The main features of demage in the area of abrasive wear are large carbide grains cracking, their parts removal and small carbide grains splintering. Availability of tribolayer on the back surface of the cutting edge changes the temperature and force conditions of the tool material cutting and demage that occurs as a result of oxidation and diffusion interaction with the elements of the processed material.
Authors and Affiliations
Sergiy Marynenko, Ihor Koval, Lyudmyla Bodrova, Halyna Kramar
Keywords
Related Articles
- EP ID EP571051
- DOI -
- Views 52
- Downloads 0
Numerical modeling of complex two-level masstransfer in media of microporous particles taking advantage of the Crank-Nicolson method
Numerical solution for mathematical model of two-component diffusion in catalytic porous particles media has been proposed. The work is based on the results of previously proposed bi-porous model and considers diffusion...
Power electronic devices based on piezoelectric elements: current state and perspectives
The analysis of existing designs of piezoelectric elements, methods of calculation and electrical circuits connecting held systematizing technical solutions in the design and use of power electronics devices based on the...
Determination of rational structural parameters of devices for polymer recycling
The method of definition of rational structural parameters of gear rolls (step and angle of teeth profile, radius of curvature, the depth of the channel) was developed for such a stress-strain state of a polymeric materi...
Research of energy potential of solar radiation in Ternopil
Experimental installation for measuring and recording of solar radiation flux density was mounted according to suggested procedures. Analysis for density flux time distribution was performed and surface energy density of...
Physical-chemical regularities of steel refining from non-metallic inclusions
Using the thermodynamic analysis, the possibility of a colloid interaction of the dispersed phase with a dispersed medium, the possibility of coagulation of the non-metallic phase, has been determined. It is established,...