OPTIMAL DESIGN OF HYDRAULIC SYSTEM FOR AN INDUSTRIAL PRESS MACHINE FOR PERFORMANCE IMPROVEMENT AND NOISE REDUCTION
Journal Title: Open Journal of Mechanical Engineering (OJME) - Year 2016, Vol 1, Issue 1
Abstract
In this paper, we present an optimal design of the hydraulic system for a class of industrial press machines. Such machines are expected to produce a large pressure on a work-piece and they are driven by a hydraulic system. Excessive vibration in the period where the press is changed from pressure holding to pressure relief is a common bottleneck problem with such machines. The vibration is closely related to the hydraulic system that controls a press head’s movement and is subsequently responsible for the property of work-pieces. In the present study, we proposed a novel design of the hydraulic circuit for pressure relief and applied it to a brick press machine and evaluated through simulation by AMESim software, which showed that the design is effective. Finally, the simulation results were validated in practical operation, which showed that, the violent vibration was decreased significantly and the noise level of the new machine is decreased from 80 decibel to 58 decibel.
Authors and Affiliations
Jiafeng Yao, Baochun Lu, Chris Zhang, Michio Sadatomi
Keywords
Related Articles
- EP ID EP404042
- DOI 10.26480/ojme.01.2016.19.24
- Views 93
- Downloads 0
FIN GEOMETRY OPTIMIZATION OF NON-NEWTONIAN FLUID, FLOWING THROUGH AN ANNULUS PIPE, USING ENTROPY GENERATION MINIMIZATION METHOD
In the present study a non-Newtonian fluid flowing in an annulus pipe, has been simulated numerically. The considered geometry is an annulus pipe equipped with some fins. Heat transfer and entropy generation for some dif...
COAL HANDLING PLANT DESIGN FOR TRAIN YARD
This paper presented belt conveyor design for coal handling plant on train yard. The paper described the architectural features of belt conveyor, which consisted of main pretext frame, drive device, transmission drum, ta...
DISCUSSION AND RESEARCH OF SPARE PARTS CONSUMPTION RULE
In this paper, through making a analysis of the structure of series system, we establish the spare parts consumption models of serial systems when the working lives of units fit exponential distribution, spare parts cons...
AUTOMATED DEVICE FOR IN-SERVICE MONITORING OF OVERHEAD PIPES, BURNERS AND TURBINES IN PETROCHEMICAL PLANTS
In present scenario in service health monitoring of turbines, boilers and overhead pipes in petrochemical and gas industries are more concern for higher perspective of research because a single day shutdown of such type...
BIO-INSPIRED BI-PLANE FLAPPING WING MAV
The research of micro aerial vehicles (MAVs) is a new field of low-Reynolds-number flow, which attracts much attention in the advanced aeronautical area. Micro air vehicles propelled by flapping wings are gaining interes...