Optimization Design of Reducting Co & HC Gas through Alloy Converter Catalyst Prototype Model

Abstract

Technological developments have an impact on increasing the number of motorized vehicles such as motorcycles, cars, and other modes of transportation. This causes air pollution impacts such as gas emissions from fossil fuels. Substances from hazardous exhaust gases consist of carbon monoxide (CO), carbon dioxide (CO2), nitrogen oxides (NO or NOx), and hydrocarbons (HC). Therefore, the purpose of this research is to design a catalytic converter through a mixture of several metals obtained from various wastes in Small and Medium Enterprises. A mixture of copper, brass, aluminium and zinc to be created as a muffler or exhaust on the test vehicle, namely the 2005 Car. The observed exhaust emissions are CO & HC using a Gas Analyzer. Measurements were observed at vehicle rotation of 1000 rpm, 2000 rpm, 3000 rpm, 4000 rpm and 5000 rpm. The results showed that the highest proportion of reduced CO levels was the use of a catalyst at 2000 rpm engine speed, which was 5.23 with Pertamax fuel, while petrolite fuel using a catalyst with 2000 rpm engine speed was 5.5. The highest percentage reduction in HC levels was when using a catalyst with engine speed of 1000 rpm of 645% with Pertamax fuel, while for pertalite fuel using a catalyst with engine speed of 1000 rpm was 705.5%

Authors and Affiliations

Suheni, Rudy Sunoko, Amin Setyo Leksono, Slamet Wahyudi

Keywords

Related Articles

Understanding the Nexus between Seaport Efficiency and Nigeria’s Non-Oil Export Performance: A Case study of Lagos Seaports 2000 -2020

This research focused on assessing the relationship between seaport efficiency and Nigeria’s non-oil export. The western ports of Lagos were selected as the Decision-Making Units (DMU) for this study covering the period...

Molecular Epidemiological Characterization of Giardia Lamblia in Kirkuk, Iraq

Results of laboratory examination of 600 faeces samples fem patients attended to Pediatric Hospital and General Kirkuk Hospital from January 2023 to December 2023 were showed 57 infection cases with Giardia lamblia with...

Consciousness Price, Store Image, and Variations in Quality Repurchase of Private Label Analysis

The purpose of this study was to prove the effect of Store Image, Price Consciousness, and Quality Variations Repurchase on Private Label, samples were taken using convenience sampling of 179 respondents and data collect...

Legal Protection of Citizens/Residents Land Rights in Relation to the Badung Regional Regulation on the Gatot Subroto-Canggu Road Development Plan

This thesis examines the legal protection of citizens' rights in relation to urban infrastructure development, focusing on the case of the planned construction of the Gatot Subroto-Canggu Road in Badung Regency, Bali. Th...

IUD Displacement with Both Arms Deeply Embedded into Myometrial Tissue: Case Report

Background: Intrauterine device (IUD) is one of the most commonly used long-acting reversible contraceptives (LARCs) method worldwide. IUD may pose some disadvantages regarding its use and may cause unwanted events. IUD...

Download PDF file
  • EP ID EP713004
  • DOI 10.47191/ijmra/v6-i1-28
  • Views 85
  • Downloads 0

How To Cite

Suheni, Rudy Sunoko, Amin Setyo Leksono, Slamet Wahyudi (2023). Optimization Design of Reducting Co & HC Gas through Alloy Converter Catalyst Prototype Model. International Journal of Multidisciplinary Research and Analysis, 6(01), -. https://europub.co.uk./articles/-A-713004