Optimization of 6-Gingerol Extraction Assisted by Microwave From Fresh Ginger Using Response Surface Methodology
Journal Title: JOURNAL OF ADVANCES IN CHEMISTRY - Year 2018, Vol 15, Issue 2
Abstract
The present study investigates optimum conditions for Microwave assisted extraction (MAE) of 6-gingerol. Ginger was dried using a cross flow dryer at 55 ± 2 0C for eight hours. Ginger powder was extracted at three different watts (400 W, 500 W, and 600 W), temperatures (50 0C, 60 0C, 70 0C) and time (10, 20, 30 min) for optimum yield. 6-gingerol content was found to be 21.15 ± 0.13 and 18.81 ± 0.15 mg/g in fresh ginger and dried ginger, respectively. Optimized condition obtained by RSM for 6-gingerol was 400 W, 70 0C at 10 min extraction time. The results of MAE are expressed by 2-D contour plot and response surface curve by keeping one variable constant which showed highest yield at 600 W, 70 0C for 30 min extraction time. Microwave assisted extracts exhibited higher antioxidant activity in comparison with conventional extracts.
Authors and Affiliations
Vedashree M, Madeneni Madhava Naidu
Keywords
Related Articles
- EP ID EP653151
- DOI 10.24297/jac.v15i2.7357
- Views 188
- Downloads 0
Concise and Efficient Total Syntheses of Virenamides A and D
Concise total syntheses of linear thiazole-containing peptides virenamides A (1) and D (4), isolated from Australian ascidian Diplosoma virens have been accomplished from Boc-L-valine (6) in 7 steps. A cyclization betwee...
Adsorption of textile dyes on raw Tunisian clay: Equilibrium, kinetics and thermodynamics
Natural clay from Nabeul region (north of Tunisia) was investigated for the removal of two anionic textile dyes (RR120 and BB150) from aqueous solution. The raw clay was characterized by means of XRD, IR spectroscopic, c...
EXPERIMENTAL INVESTIGATIONS ON METHANOL FUELLED D.I DIESEL ENGINE WITH CATALYTIC COATINGS ASSISTED BY GLOW PLUG
       A comprehensive study on the methanol with three different types of Catalytic coatings assisted by Glow Plug is discussed in this paper. A four stroke single cylinder water cooled D.I diesel engine was...
STATISTICAL MODEL BASED OPTIMAL PREDICTION ON DRILLING PARAMETERS
The drilling is an imperative machining practice in the mechanical field for fitting or cutting the materials devoid of any disturbance. Various elements are basically employed within the automobile applications on accou...
A Two Step Synthesis Route of WC Nanopowders
Here, a novel molten salt route to synthesize ceramic WC nanopowders was presented. Compared to the traditional synthesis procedures, this method is relatively low cost involving two-step synthesis route. In the argon at...