Optimization of MRR on ECM Using Taguchi Method

Abstract

Non-conventional machining has grown out as the need to machine different engineering materials, composites and ceramics having good mechanical properties and thermal properties as well as better electrical conductivity. The work has been carried out on mild steel specimen having good thermal and electrical conductive properties. The work on output parameters like as Material Removal Rate (MRR) and Surface Roughness (SR) of stainless steel as a work piece material. Respect on the selection of input parameters of ECM such as Voltage, Electrolyte Concentration and feed rate are suitable for improving the productivity and other output parameters. This work formulates the relationship between input and output variables for improving the ECM operation. The Regression analysis is used for making the relationship between independent and dependent variables. Our main objective is to determine the optimal value of the process parameter commonly used in the ECM process which is Voltage, Electrolyte Concentration and Feed Rate so as to improve the output parameter such as Material Removal Rate and Surface Roughness by Minitab Taguchi optimization technique method.

Authors and Affiliations

Viveka Nand, Meeraj Ahmad, Dwivesh Kumar Dubey, Dibya Tripathi, Sourabh Rai

Keywords

Related Articles

A Literature Review on Cycle Time Reduction in Material Handling System by Value Stream Mapping

Cycle time should be considered as a viable option when an organization is trying to improve efficiency, cost base and customer responsive. Value stream mapping is a paper and pencil tool that helps you to see and under...

A nondestructive sensing robot for crack detection and deck maintenance

Most of the developing countries, mainly depends on the public transport.It is important to maintain the roads and bridges to save the human life.Traditionally a human inspector visits the damage inroadshe/she will not...

Traffic Sign Recognition Using SVM

A few applications require data about road furniture. Some portion of the assignment is to study all traffic signs. This must be accomplished for a large number of km of street, and the activity should be rehashed occas...

Introduction to IEEE 802.11 Rogue Access Point Detection Mechanism Using Covert Channel

The problem of providing protection to the user from a rogue access point is a big problem today. To protect against the rogue access point through existing mechanism is by using IEEE 802.1x. However, it is difficult to...

Performance Enhancement of Domestic Refrigerator Using Hydrocarbon Mixture R-436A as Refrigerant

Domestic refrigerators use R-12 and R-134a as refrigerants because these gases have excellent thermodynamic properties. According to MONTREAL and KYOTO protocols, R-12 should have been phased out by 2010 and the consump...

Download PDF file
  • EP ID EP22789
  • DOI -
  • Views 238
  • Downloads 3

How To Cite

Viveka Nand, Meeraj Ahmad, Dwivesh Kumar Dubey, Dibya Tripathi, Sourabh Rai (2016). Optimization of MRR on ECM Using Taguchi Method. International Journal for Research in Applied Science and Engineering Technology (IJRASET), 4(11), -. https://europub.co.uk./articles/-A-22789