Optimization of Process Parameters in Turning Operation of Austenitic Stainless Steel Rod using Taguchi Method and ANOVA
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 3
Abstract
This research paper is an outcome of investigation made on the parameters those affects on austenitic stainless steel work piece roughness in the turning operation as a part of that the parameters involved in the operation were analyzed and formulated as a Design of experiments to check out the influence of them in the turning operation. Mainly spindle speed, feed rate and depth of cut were taken as chief contributors in the development of proper work piece surface. And the emphasis is made on the roughness of the work piece as a part of that the objective of the work is done to minimize the roughness by optimizing the process parameters. The results of the experiments made by the Taguchi’s method have taken into further investigation by the Analysis of Variance (ANOVA) method. Out of all parameters the feed rate was found as an important parameter that influences the surface roughness.
Authors and Affiliations
A. Suresh, G. Diwakar
Keywords
Related Articles
- EP ID EP614303
- DOI 10.24247/ijmperdjun201941
- Views 96
- Downloads 0
CFD ANALYSIS OF CD NOZZLE AND EFFECT OF NOZZLE PRESSURE RATIO ON PRESSURE AND VELOCITY FOR SUDDENLY EXPANDED FLOWS
A numerical work was carried out to study the effectiveness of micro-jets to control base pressure in suddenly expanded two-dimensional planar duct. Two micro-jets of 1 mm orifice diameter located at 90° intervals along...
Application of Link Adjacency Values on Six Link Planar Mechanisms for Identification of Isomorphism
In present days, researchers deal with a problem to identify the isomorphism in structural synthesis among the kinematic chains (KC). In recent times, a new method was proposed named as Link adjacency values. In this met...
Engine Performance and Emission Characteristics of 1-Octanol Blended Bio-Diesel in a Single Cylinder Diesel Engine
Experiments were carried out on a diesel engine operating on diesel, bio-diesel and bio-diesel blended with 1- octanol. The blended fuels are prepared with 10%, 20%, and 30% of 1-octanolby volume. The experiments were co...
RAIL ROAD WHEEL: DESIGN, PERFORMANCE AND MANUFACTURING ASPECTS
Railroad wheels do the toughest job. Design of wheel web and material used are the most important. Online performance specifies the material properties required. Wheel manufacturing process using upward pressure poured c...
CONCERN OF CONSTRUCTION INDUSTRY TOWARDS OCCUPATIONAL SAFETY AND HEALTH ISSUES
The construction industry is the most important sector in the development of the country after agriculture sector in India. Apart from this, it is the one which has been neglecting the laws which are to be followed for i...