OPTIMIZATION OF SURFACE ROUGHNESS IN ELECTRIC DISCHARGE MACHINING OF AISID3 STEEL USING SIC AS DIELECTRIC
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 5, Issue 7
Abstract
In manufacturing industries various processes are adopted for material removing due to increased demand for alloy materials. It is very difficult to progress with conventional machining processes as the direct contact between tool and workpiece often causes damages to the material. The solution to it is Non-conventional machining in which Electric Discharge Machining (EDM) also referred to as spark machining process is one of the most effective processes of machining. In today’s era of global competition and technical growth where there is a strong need to of high quality and efficient products. Surface roughness is one of the critical and most effective parameter that affects several Mechanical properties, thus desired surface quality is of great importance for the functional behaviour of machines. It is also recognised that machining conditions affects the quality of the operation performed. Such parameters should be carefully selected so as to maximize the economics of manufacturing. D3 steel is widely used as a main material in die manufacturing industries where superior machinability is an important factor. in the present work the DOE(Design of Experiment) have been selected to optimize EDM parameters for minimizing surface roughness during machining of AISID3 steel with kerosene and kerosene with SiC.
Authors and Affiliations
Palak Nagpal*
Keywords
Related Articles
- EP ID EP96175
- DOI 10.5281/zenodo.57045
- Views 87
- Downloads 0
Effect of Process Variables on the Production of Biodiesel by the Non-Catalytic Supercritical Trans-Esterification of Sheanut Oil
The production and characterization of biodiesel from sheanut oil was carried out using the supercritical transesterification process and the effects of process variables such as temperature, feed blending ratio,...
CYCLE TIME REDUCTION FROM DESIGN TO MANUFACTURING BY INTEGRATING CAD-CAM AND PROCESS PLANNING ACTIVITIES IN SMALL SCALE DIE MANUFACTURING COMPANY.
In small scale industry the current environment tends to force employee to work in isolation also it observed that they works on conventional machines when CNC or VMC machines are available, this is because of som...
Square Shaped DRA with Square Patch
A square shaped dielectric resonator antenna has gain of 5.28 dB with bandwidth of 343MHz .It could be developed for possible application in many systems which are wireless system like WLAN if properly scaled to...
STUDY AND IMPLEMENTATION OF NAMED ENTITY RECOGNITION IN HINDI LANGUAGE USING PHP
NER Technique for HINDI language and a lot of NER issues relating to language has been developed and studied in this paper. This System includes a List Look-Up Approach for Named Entity Tagset associated with NER Syste...
Effects of visual conflicts on 3D Object Picking Process In Non Immersive Virtual Environment
Object Picking in Virtual Environments is one of the main tasks along with travel and manipulation. It deals with indicating objects and has been implemented with multiple techniques, each trying to improve perfor...