Optimization Scheme of Internal Circulating Heat Dissipation System for Tram Ground Charging Device
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 2
Abstract
[Objective] To solve the problems of unstable shell protection performance, complex HD (heat dissipation) system configuration, and low HD efficiency existing in current tram ground charging devices, a scheme of ICHD (internal circulating head dissipation) system for tram ground charging device is designed. [Method] The composition and HD principle of the ground charging device are introduced, and the reasons for the low HD efficiency are analyzed. In view of the overall ICHD system of the enclosed cabinet, an ICHD system optimization scheme is proposed. The FLOTHERM simulation software is utilized to compare the airflow velocity and temperature rise between the original and optimized schemes, and experimental verification is conducted. [Result & Conclusion] It is found that the overall ICHD system based on air-conditioning cooling is unable to solve the HD issues of high-power and high-heat loss centralized heating devices. This inefficiency is not related to the cooling capacity of the refrigeration system but rather to the airflow circuit of the HD system. The proposed optimization scheme forms a closed-loop airflow circuit between the air-conditioning airflow outlet, inductor and air-conditioning return air vent, significantly reducing the temperature rise of high-power centralized heating devices. This effectively enhances the HD performance of the HD system, resulting in a temperature rise reduction of approximately 20.1% in the inductor of the charging device after optimization. The proposed optimization scheme satisfies the temperature rise requirements of the ICHD system.
Authors and Affiliations
Xiuqiang CHEN
Keywords
Related Articles
- EP ID EP730102
- DOI 10.16037/j.1007-869x.2024.02.037
- Views 41
- Downloads 0
Maintenance Strategy Optimization of Urban Rail Transit OCS Based on Intelligent Operation and Maintenance
Objective With the development of the intelligence technology and the building of intelligent operation and maintenance platform for urban rail transit overhead catenary/collector system （OCS）, the operation and mainte...
Prediction Model of Metro Traction Power Consumption Based on Grey Neural Network
Objective In order to improve train operational efficiency, it is necessary to monitor metro traction power consumption and establish a relevant energy consumption model for prediction analysis of metro traction power co...
TCMS-based Dual-bus Grid-connected Power Supply Control Technology Scheme for Metro Train Auxiliary Power Supply System
Objective In the current mainstream of train auxiliary power supply systems, such as cross-supply method and extended supply method, the failure of a single SIV (auxiliary inverter) can impact the normal operation of ele...
Research on Anti-overturning Device of Urban Rail Transit Trains
Objective During the operation of urban rail transit trains, incidents such as collisions, derailments and overturning may occur. It is essential to study the dynamic behavior of trains and the technology to prevent over...
Toe Load Detection and Test Verification Based on the Natural Frequency of Fastener Elastic Rod
Objective The insufficient toe load of the fastener elastic rod will induce loosening of the surrounding fasteners, aggravate the dynamic response between wheels and rails, affecting the service life of the track compone...