Optimization Speed Control of DC Separately Excited Motor Using Tuning Controller of Linear Quadratic Regulator (LQR) Technique
Journal Title: INTERNATIONAL JOURNAL OF ENGINEERING TRENDS AND TECHNOLOGY - Year 2014, Vol 9, Issue 10
Abstract
The tuning of Linear Quadratic regulator (LQR) controllers is a challenge for researchers and plant operators. This paper presents a optimization and comparison of time response specification between Traditional ZN Tuning & Modified ZN Tuning controllers with Linear Quadratic Regulator (LQR) for a speed control of a separately excited DC motor. The goal is to determine which control strategy delivers better performance with respect to DC motor’s speed. Both these method are compared on the basis of output response, less rise time, less setting time and less over shoot for speed demand of DC motor.
Authors and Affiliations
Nikhil Tripathi , Rameshwar Singh
Keywords
Related Articles
- EP ID EP94223
- DOI -
- Views 115
- Downloads 0
An Empirical Model of Network Traffic Classification for Identifying Anonymous Behavior
Optimizing the internet traffic is always an important research issue in the field of network traffic classification, although various approaches available for minimizing the traffic over heads during the network traffic...
Experimental Studies on Concrete Replacing Fine Aggregate with Blast Furnace Slags
In our world today, concrete has become ubiquitous. It is hard to imagine modern life without it. Approximately five billion tonnes of concrete are used around the world each year. The increasing popularity of concrete a...
Environmental Issues in Erbil City
Erbil city is facing environmental problems such as Wastewater treatment, Water supply, Land preservation, Air pollution, Noise pollution, Pollution due to the huge increase of the numbers of vehicles, as well as t...
A Brief View of Model Based Systems Engineering Methodologies
The goal of this paper is to provide a brief view on Model Based Systems Engineering (MBSE) Methodologies that may be useful to systems engineers in understanding to engineer the complex, large and interdiscipl...
Determination of Heat Transfer Cooling Rates in an Mixing Vessel Using Kanthal Heating Element
Experimental Overall heat transfer rates have been evaluated using heat balance energy equations for each experimental flow rates from cooling data observations in a mixing vessel using helical coil centrally subme...