Optimizing performance of lithiumion battery by nanosilicon addition mixed in LI4TI5O12 anode made using mechanochemicalhydrothermal method
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 6, Issue 12
Abstract
<p>Lithium Titanate (Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub> or LTO) is one of the best candidates to replace graphite as anode material in the lithium-ion battery (LIB), due to unwanted solid electrolyte interphase (SEI) layer formation that consumes Li<sup>+</sup> ion and reduces LIB performance and may cause thermal run-away. The ability of LTO to avoid SEI formation and undergo zero-strain during intercalation makes LTO has excellent safety during application. However, the spinel lithium titanate has the low theoretical capacity and poor electronic conductivity. This less conductivity brings limitation to its application. The sol-gel method and combining the LTO with Si that possesses a high theoretical capacity are the key factor to overcome the LTO disadvantages. To attain its high power, safety factor and low-cost fabrication properties, hydrothermal-mechanochemical treatment were used in sol-gel synthesis method in order to outgrowth (Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub>)nanostructure. Then, the 5 %, 10 %, and 15 % weight ratio percentage of silicon nano-particle were added into electrode composite in order to enhance the capacity of lithium titanate anode. All samples were characterized using XRD, SEM and TEM. The active anode material LTO/Si nano was coated and prepared into coin cell battery. The assembled coin half-cell used lithium metal foil as the counter electrode. The battery performance was tested using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and charge-discharge (CD).</p><p>The XRD results showed that the obtained compounds of lithium titanate (Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub>) crystalline spinel and the impurities of TiO<sub>2</sub> rutile. The SEM micrograph results showed almost uniform morphological structures as agglomerates in most of the samples. While, the TEM image of Si nano had a crystalline phase with the particle size less than 100 mm. However, the presence of unwanted SiO<sub>x</sub> layer was not clearly observed. Addition of Si-nanoparticle could increase the specific capacity to above the LTO theoretical capacity, however, the formation of SiO<sub>x</sub> insulating layer is predicted to be the main hindrance that reduces the effectiveness of addition of Si nanoparticle to the present LTO compound. The hydrothermal treatment of the sample could enhance the performance of nano-composite LTO/Si anode. Based on CD results, the obtained LTO/Si compound possesses the discharge capability up to 12 C.</p><p class="Abstract">The CV and CD results showed the optimum percentage of 10 % wt. Si and best capacity of the sample was obtained at 229.72 mAh/g</p>
Authors and Affiliations
Bambang Priyono, Anne Zulfia Syahrial, Achmad Subhan, Faizah Faizah, Agnes Gusvianty
Keywords
Related Articles
- EP ID EP528347
- DOI 10.15587/1729-4061.2018.151937
- Views 55
- Downloads 0
Improving efficiency of machining the geometrically complex shaped surfaces by milling with a fixed shift of the cutting edge
<p>In order to improve efficiency of machining by milling geometrically complex shaped surfaces, mainly the methods related to improvement of properties of the tool material, change of composition and properties of the t...
Modeling the conveyor-modular transfer of multimedia data in a sensor network of transport system
The paper studies the issues of distributed sensor networks interaction based on the Internet of Things architecture in the context of automated control systems design for dynamic objects of transport infrastructure. The...
Design of the architecture of an intelligent system for distributing commercial content in the internet space based on SEO-technologies, neural networks, and Machine Learning
We have considered a task on designing an intelligent system of commercial distribution of informational products using a personalized approach to visitors based on the categories and tags of content that interests visit...
Analysis and selection of the parametric profile of a powerplant engine for a light trainer aircraft
<p>The relevance of this study is predetermined by the improvement to the fuel efficiency of an aircraft and, as a consequence, by the reduced cost of the life cycle of an aircraft engine, which is part of a power assemb...
Synthesis of a fractional-order PIλDμ-controller for a closed system of switched reluctance motor control
<p>The relevance of creating high-quality control systems for electric drives with a switched reluctance motor (SRM) was substantiated. Using methods of mathematical modeling, transient characteristics of the process of...