Optimizing the removal of methylene blue from aqueous solutions using persulfate activated with nanoscale zero valent iron (nZVI) supported by reduced expanded graphene oxide (rEGO)
Journal Title: Environmental Health Engineering and Management Journal - Year 2021, Vol 8, Issue 1
Abstract
Background: To remove methylene blue (MB) from aqueous solutions, nanoscale zero-valent iron (nZVI) predicated on reduced expanded graphene oxide (rEGO) was used as the activator of persulfate. Methods: Scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS) analyses were used to investigate the surface morphology and to examine the surface elemental composition. X-ray diffraction (XRD) was used to determine the chemical compositions of the synthesized compound. In this study, the effects of pH (3-9), activator dose (0.4-1.6 g L-1), persulfate concentration (0.192-0.768 g L-1), and reaction time (0-60 minutes) on the removal of 10 mg L-1 MB were studied by nZVI -reduced expanded graphene oxide/persulfate (nZVI@rEGO/PS) process. Results: The maximum removal efficiencies of MB at optimum operational conditions (pH 3, activator dose = 1.2 g L-1, persulfate concentration = 0.576 g L-1, and reaction time = 20 minutes) by nZVI@rEGO/PS process was 96%. The chemical method was used to prepare expanded graphene. The volume of natural flake graphite increased about 25 times after the process. SEM image of the nZVI@rEGO showed the presence of nZVI placed on the EGO surface in chain structure with a diameter about 100 nm. The EDS analysis of the activator indicated the existence of Fe element to an amount greater than 50%. Conclusion: According to the results, nZVI@rEGO is considered as a promising activator of persulfate.
Authors and Affiliations
Alaa Mohamad Soubh, Mohammad Ali Abdoli, Lorin Ali Ahmad
Keywords
Related Articles
- EP ID EP692838
- DOI 10.34172/EHEM.2021.03
- Views 124
- Downloads 0
Implement of zoning in order to evaluate the establishment of the airports using integrating MCDM methods and noise pollution modeling softwares
Background: Finding the best location for the airport reduces the negative effects of construction and its activity on the environment. This study aimed to evaluate the establishment of the airports (Mehrabad and Imam...
Quantitative assessment of health, safety, and environment (HSE) resilience based on the Delphi method and analytic hierarchy process (AHP) in municipal solid waste management system: A case study in Tehran
Background: The health, safety, and environment (HSE) resilience is the ability of a system to adapt, resist and cope with the HSE risks in critical situations. In this study, the HSE resilience in solid waste manageme...
Health risks of welding fumes: A review to investigate the relationship between oxidative stress levels and trace metals in body fluids of welders
Background: Welding fumes (WFs) contain heavy metals that can induce oxidative stress and health issues in welders. This review investigated the relationship between oxidative stress biomarkers and trace metals in weld...
Feasibility of natural wastewater treatment systems and life cycle assessment (LCA) for aquatic systems
Background: Natural wastewater treatment systems (NWTSs) in small villages are a major challenge for European water authorities. With growing social demands for environmental practices, evaluating the feasibility and e...
Evaluation of the efficiency of electrocoagulation process in removing cyanide, nitrate, turbidity, and chemical oxygen demand from landfill leachate
Background: Leachate contains toxic and non-biodegradable substances that are not easily treated by conventional treatment methods. This study investigated the effect of pH, current density, and reaction time parameter...