Optimum Control Parameters During Machining of LM13 Aluminum Alloy Under Dry Electrical Discharge Machining (EDM) With A Modified Tool Design
Journal Title: Materials Science-Medžiagotyra - Year 2019, Vol 25, Issue 4
Abstract
Dry Electrical Discharge Machining(EDM) is considered as a green manufacturing process in which the liquid dielectric medium is replaced by a high velocity gas, which results improved process stability. A special tool design is adopted to find the optimum control parameters during machining of LM13 Aluminum alloy under dry EDM mode. The drilled and slotted cylindrical copper rod is used as a tool. Discharge current (I), voltage (V), pressure (P) and pulse on time (TON) are considered as varying input process parameters and duty factor and tool rotational speed are chosen at the fixed level. TaguchiL27 orthogonal array is used to design the experiment and the experiments are conducted accordingly. The experimental results are analyzed using Grey Relational Analysis to find the optimal combination of the process parameters. Also, ANOVA test is conducted to ensure the conformity of the simulation results. Pulse on time is found as the most significant parameter which is followed by voltage. Furthermore, the parameters with the highest relational grade (4 A, 200 μs, 60 V and 1.5 kPa) are used in experiment to validate the simulation results. The simulation and experimental results have a good agreement with less than 0.5 % error.
Authors and Affiliations
Pragadish NAGARAJAN, Pradeep Kumar MURUGESAN, Elango NATARAJAN
Keywords
Related Articles
- EP ID EP674913
- DOI 10.5755/j01.ms.25.4.20899
- Views 74
- Downloads 0
Modified Phillipsite as a Novel Ion-Exchanger for Potassium Extraction from Seawater
Template-free preparation of phillipsite as a novel K+ ion-exchanger was studied systematically by hydrothermal synthesis. The alkalinity, dosage of water glass, dosage of H2O, aging time, reaction temperature and time o...
Modification of Nife Layered Double Hydroxide and Photocatalytic Activity
Modifying materials by ions with multiple valence states is an effective way for enhancing their properties. NiFe layered double hydroxides (NiFe LDHs) were prepared by using a hydrothermal method. Efficient LDH photocat...
The Regeneration Cycle of Cobalt Chemical Conversion Waste Liquid on Aluminum Alloys
In this research, the regeneration cycle of cobalt chemical conversion waste liquid, the effects of oxidizing agents on solution service life, and the influence of oxidizing agents on the treatment of waste liquid was st...
A Study of Mechanical Properties of Polymer Composite Membranes with Various Ionic Liquids at Elevated Temperatures
Ionic liquid/sulphonated poly(ether ether ketone) composite membranes were prepared using following ionic liquids: 1,2,3-trimethylimidazolium dimethylphosphate, 1-hexyl-3-methylimidazolium dimethylphosphate, 1-dodecyl-3-...
Experimental Study on the Thermal Decomposition of Two Nitrocellulose Mixtures in Different Forms
In order to ensure the safety of nitrocellulose (NC) mixtures in storage, transportation and usage, it is necessary to study the thermal stability of NC mixtures. In the present study, the thermal decomposition of two co...