Parameters of the emitters of a cold plasma
Journal Title: Вісник НТУУ КПІ. Серія Радіотехніка, Радіоапаратобудування - Year 2011, Vol 0, Issue 46
Abstract
Investigatedin the microwave range radiophysical characteristics of cold plasma gas discharge andelectromagnetic characteristics of the U-shaped loop and a straight rod plasma emitters (PE)performed on the basis of the plasma. Evaluated in the meter wavelength range ofconductivity of cold plasma and the relative permittivity. In FEKO software environment,taking into account these data are simulated and studied loop and a straight rod PE. It wasfound that for positive values . r , loop PE provides more bandwidth than for negative values.The frequency range of the loop PE through a cold plasma is about four times larger in termsof VSWR <2 and three times - in terms of VSWR <5, than for the same emitter configurationof aluminum. When calculating the effective loop PE with positive values . r of PE efficiencyis 50-60%. For rod PE calculated efficiency does not exceed 20%.
Authors and Affiliations
V. Ovsyanikov, S. Moroz
Ferrite resonator in Y-junction stripline
Introduction. One of the ways to miniaturize nonreciprocal microwave ferrite devices is using a ferrite resonator in ferromagnetic resonance. It is necessary to investigate the inter-action of the ferrite resonator with...
Direct digital method fast-acting analysis of the correlation-interferometric radio direction-finding with reconstructing of spatial analytical
Introduction. Nowadays radio control of radio electronic devices must be carried out in the conditions of sticky electromagnetic wicket, large prior uncertainty in relation to the parameters of radiations, and also in th...
Modeling of Micromoving of Membrane Piezoquartz The Measuring converter
In work it is described piezoquartz the measuring converter of air pressure combines the use of two types of control: tensosensitivity of quartz resonator and management of it modulation of an interelectrode gap. Also th...
Computation method оf minimal cut sets for fault-tolerant systems based оn structural-automatic model
Introduction. The сomputation method of minimal cut sets for fault-tolerant structures based on structural-automatic model is presented in this work. Method. The first step of this method is the development of binary str...
Images restoration by theconditional deconvolution methodin basis of Hadamard transformation
An algorithm of the conditional deconvolutionmethod using as the base of discrete orthogonal Hadamard transformation is presented in the paper. The main task of the proposed algorithm is matrix inversion (quadratic form)...