PARTICULARS IN KILLING GAS PRODUCTION WELLS
Journal Title: UNKNOWN - Year 1994, Vol 6, Issue 1
Abstract
To kill a production well means to perform some technical and technological processes for establishing the static hydraulic balance in the well with no additional surface pressures. The standard procedure of the well killing process as adopted in Croatia, is described. Further, the procedures of how to locate the spot where there is a leakage on production equipment and how to determine the levcl of fluid in tubing or an-nulus is explained. Finally, the aim of this paper is also to point out the importance in selection of killing fluids considering a possibility of formation damage.
Authors and Affiliations
Davorin Matanović Nediljka Gaurina-Međimurec Zdenko Krištafor
Keywords
Related Articles
- EP ID EP29831
- DOI -
- Views 189
- Downloads 5
PROBLEMI U SUSTAVU TUBING/PAKER
U naftnim i plinskim bušotinama koje su u obradi ili proizvodnji u sustavu tubing/paker treba rješavati brojne probleme. Promjene temperatura i tlakova koje se zbivaju tijekom različitih operacija obično rezultiraju prom...
MODELS TO ESTIMATE BRAZILIAN INDIRECT TENSILE STRENGTH OF LIMESTONE IN SATURATED STATE
There are a number of methods of estimating physical and mechanical characteristics. Principally, the most widely used is the regression, but recently the more sophisticated methods such as neural networks has frequently...
ORGANISATIONAL-TECHNOLOGICAL CHARACTERISTICS OF BLASTING WORKS ON THE GRIČ TUNNEL
The paper describes organisational-technological characteristics of blasting works during the excavation of the Grič Tunnel. The significance of blasting works during the excavation of the tunnel is shown through adjustm...
RADON MAPPING IN CROATIA AND ITS RELATION TO GEOLOGY
Radon is known as the main contributor to the natural background radiation exposure and mapping of different radon phenomenon presents an important task in both scientific and regulatory context. Considering the aspect o...
THE INFLUENCE OF GEOLOGY ON THE COURSE AND OUTCOME OF THE THIRD BATTLE OF YPRES (FLANDERS, WW1)
Geological structure of the terrain as a ground for a battlefield could be a significant factor for the success or failure of a military operation. The geology of the Belgian town of Ypres was an important, maybe even cr...