Peculiarities in WC and W2C Eutectic Phases Dissolution in Interfacial Zones of Composites
Journal Title: Фізика і хімія твердого тіла - Year 2016, Vol 17, Issue 3
Abstract
Annotation: The structural and phase composition of dissolution-and-diffusion interfacial zones at the particle-matrix interfaces of the composites reinforced with W–C particles infiltrated by a molten iron-base binder has been investigated. The peculiarities in the filler’s phases dissolution during infiltration have been explained within the framework of computed model allowing the estimation of an average atom oscillation frequency of the investigated phases.
Authors and Affiliations
O. V. Sukhova, Yu. V. Syrovatkо
Keywords
Related Articles
- EP ID EP247889
- DOI 10.15330/pcss.17.3.363-367
- Views 99
- Downloads 0
Temperature Dependence of Initial Permeability of NixCo1-xFe2O4 Ferrite System
The aim of this work was to create and study of ferrite nickel-cobalt powders, using sol-gel technology with participation of auto-combustion. Dependence of the initial permeability from the degree of substitution of cob...
The Influence of Thermal Annealing and Radiation Irradiation on substructure of “Hat Wall” SnTe Films
The results of research of the influence of both the annealing epitaxial SnTe / (111) BaF2 films in vacuum and radiation of ~ 5 MeV alpha particles on their substructure parameters presents in paper.
Computersimulation of the Dynamic Operating Modes of Thermoelectric Device for Cryodestruction
This paper presents the results of computer simulation of optimal dynamic modes of thermoelectric device for cryodestruction. The optimal time function for controlling the supply current to thermoelectric micromodule in...
Influence of Doping and Two-temperature Annealing on CdTe:Br Defective Subsystem
The influence of impurities and annealing conditions on the electrical properties of single cadmium telluride crystals with bromine doping grown by Bridgman method and annealed in cadmium atmosphere at temperatures T = 8...
mproving the Technology Synthesis and Properties of Biodiesel
Existing technologies for the synthesis of active additives to motor fuels are quite complicated. Therefore,improvement of the technology of biodiesel fuel synthesis in order to increase the cetane number and andimprovem...