Performance Analysis of a Solar Dryer Equipped with a Recycling Air System and Desiccant Chamber
Journal Title: Journal of Agricultural Machinery - Year 2013, Vol 3, Issue 2
Abstract
Drying is a high energy consuming process. Solar drying is one of the most popular methods for dehydration of agricultural products. In the present study, the performance of a forced convection solar dryer equipped with recycling air system and desiccant chamber was investigated. The solar dryer is comprised of solar collector, drying chamber, silica jell desiccant chamber, air ducts, fan and measuring and controlling system. Drying rate and energy consumption in three levels of air temperature (40, 45 and 50 oC) and two modes of drying (with recycling air and no-recycling with open duct system) were measured and compared. The results showed that increasing the drying air temperature decreased the drying time and increased the energy consumption in the mode of non-recycling air system. The dryer efficiency and drying rate were better in the mode of recycling air system than open duct system. The highest dryer efficiency was obtained from drying air temperature of 50 oC and the mode of recycling air system. In general, the efficiency of solar collector and the highest efficiency of the dryer were 0.34 and 0.41, respectively.
Authors and Affiliations
M. H. Aghkhani,M. H. Abbaspour-Fard,M. R. Bayati,H. Mortezapour,S. I. Saedi,A. Moghimi,
The effect of dropping impact on bruising pomegranate fruit
Introduction: The pomegranate journey from orchard to supermarket is very complex and pomegranates are subjected to the variety of static and dynamic loads that could result in this damage and bruise occurring. Bruise ar...
Modeling and Predicting the Forces on Moldboard Plough by using Response Surface and Artificial Neural Network
IntroductionTillage is a very important operation that influences the growth and productivity of agricultural products. It is necessary to introduce some conditions to improve soil physical properties, aeration, permeabi...
Effect of Frequency and Vibration Time on Shaker Performance for Mechanized Harvesting of Orange (Thomson cultivar)
Manual citrus harvesting is commonly performing hard, expensive and time consuming. In this study, a factorial experiment with a completely randomized design in three replications was performed to find out the effect of...
Evaluation and Comparison of Three Types of Pistachio Hullers Used in Kerman Province
The objective of this study was to evaluate different pistachio hullers and determine the proper harvest time of pistachio nuts for hulling. Three pistachio hulling machines (Helical drum, Helical- blade drum, Rubber dru...
Analytical and Experimental Draft Force Evaluation of Plastic Coated Chisel Tines
Introduction Improving the efficiency of all agricultural operations has always been important for farmers and engineers. It is well known that the force required for cutting a soil using narrow blades is a function of s...