PERFORMANCE AND EMISSION CHARACTERISTICS OF HIGH SPEED DIESEL ENGINE BLENDS WITH CARBON NANOTUBES ADDED ETHANOL-DIESEL
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 4
Abstract
The principle criteria of this experimental work is to study and examine the performance and emission characteristics of a single cylinder 4 stroke KIRLOSKAR AV1 Diesel engine with the carbon nanotubes expansion mixes of ethanol and diesel. The variety in execution parameters and emanations, because of the expansion of nanoparticles was examined by the experimentation. In this work, a 50ppm grouping of carbon nanotube (CNT) was added to the mixes of ethanol and diesel to discover the varieties when contrasted. Absolutely, three unique kinds of mixes were readied, named as E1050CNT (ethanol 10%, diesel 90%,50ppm CNT), E2050CNT (ethanol 20%, diesel 80%,50ppm CNT) and E3050CNT (ethanol 30%, diesel 70%,50ppm CNT), to gauge the execution parameters like Specific fuel consumption(SFC), Brake warm efficiency(BTE) and qualities of emanations like CO, HC, CO2 and NOX at a steady speed of 1500 rpm at different heaps of 3kg, 6kg, 9kg and 12kg to make examination with diesel. At the point, when the outcomes contrasted and diesel the SFC was expanded, BTE is marginally lessened and the emanations like CO, HC and CO2 were diminished, yet NOX was somewhat expanded with the nano-ethanol-diesel mixes. The outcomes from the analysis demonstrates that the coveted states of execution parameters like SFC and BTE were acquired with E10CNT50 mix and a critical abatement in outflows was gotten with E30CNT50 mix. At last, it is prescribed to utilize the nano-ethanol-diesel mixes for a diesel motor as a satisfactory and reasonable elective fuel with no changes.
Authors and Affiliations
CH SEKHAR1 K, PRASADA RAO M. Y. , SARITH NAIDU3 T, LAKSHUMU NAIDU A
Keywords
Related Articles
- EP ID EP430411
- DOI 10.24247/ijmperdoct201812
- Views 79
- Downloads 0
Corrosion Fatigue of Welded Joints in Marine and Naval Structures: A Review
Throughout the service life, marine/ naval structures experience environmental loading which cause cyclic stress variations in their structural members. These variations can cause fatigue cracking in welded structural de...
EVALUATION OF STANDARD TIME WITH THE APPLICATION OF RANK POSITIONAL WEIGHTED METHOD IN THE PRODUCTION LINE
Assembly line balancing is one of the major concern as far as a manufacturing plant is considered. The plant productivity solely depends on this parameter and hence balancing and figuring out the idle time in a productio...
STUDIES ON EFFECT OF WELDING PARAMETERS ON THE FRICTION STIR WELDING OF ALUMINIUM 6061-T6 BUTT WELDED JOINTS USING TAGUCHI L9 APPROACH
The two sheets of aluminum 6061-T6 alloy of size 200×150×3 (mm) are butt-welded by the friction stir welding process by varying the weld parameters such as rotational speed, tilt angle, and feed. The taguchi L9 experimen...
An Analysis of the Quality Award Model by AHP
This paper is proposed as a model for ranking of fields, criteria and sub-criteria in the quality award model. It is based on the Analytic Hierarchy Process (AHP). The AHPis used to find the criteria’s weigh...
Static, Dynamic and Impact Stress Analysis of a Bus Body Structure Using Finite Element Analysis
The increased speed and weight of modern Bus puts the components of a Bus body in a highly dynamic load situation. Bus body is the core component in a vehicle. A classic finite element model of the Bus body is establishe...