Performance of Distance Relays in the Presence of Distributed Power Flow Controllers
Journal Title: روش های هوشمند در صنعت برق - Year 2018, Vol 9, Issue 34
Abstract
Recent efforts to increase the power transmission capacity and increase the level of network stability have increased the use of Flexible AC Transmission Systems elements in the power system. The protective system, which is one of the most important parts of the power system's operation, is seriously affected by these devices, so their study is considered necessary. Among protection relays, the protection of the distances due to high speed, proper operation in different network conditions are used as the main protection of transmission lines. Consequently, it is inevitable that the lines compensated by flexible AC systems are protected by long-range relays. In this paper, the Distributed Power Flow Controller has been investigated and simulated, and then the effect of these devices on the measured impedance and the characteristic of the disturbance relay is shown. It is also shown in this paper that in addition to the effects of the relay seen on the relay due to changes in the power system, the type of control system and the adjustment of the parameters of these devices will have different effects on the impedance seen by the relay. To investigate the effect of controller distributed power distribution on the protection of the energy transmission distances, as well as the effect of the impedance seen on the relay due to the presence and type of control system that the distributed power controller works with, it uses the PSCAD / EMTDC software for the model These compensator have been used.
Authors and Affiliations
Hadi Amiri Moghadam, Mahdiyeh Eslami
Keywords
Related Articles
- EP ID EP569257
- DOI -
- Views 97
- Downloads 0
Reliability Evaluation of Power System SVC Types Using a Markov Chain
Static reactive power compensator (SVC) plays an important role in power system reliability stems. In evaluations of reliability, only reactive power is considered as a constraint network is placed in the SVC BrrsyHa im...
Design and Implementation of an Optimal PV Refrigeration System in the Smart Grid Considering Multi-objective Optimization
Today, optimization in power systems is an unavoidable necessity. Energy intensity reduction in electrical devices and enhancement of their efficiency and performance, electricity loss reduction and voltage profile impro...
Turn-on Angle Control Using Modified Torque Sharing Function for Torque Ripple Reduction in Switched Reluctance Motors
In the recent years, the use of switched reluctance motors (SRM) in industrial applications has been increased. In this regard, a large amount of research studies have been conducted on controlling the speed and torque o...
A New Control System for a Dual Stator-Winding Cage Rotor Induction Generator in Direct Grid Connected Condition with Maximum Power point tracking of Wind Turbine
In this research a new control system for MPPT in a grid connected three-phase squirrel cage induction wind turbo-generator is presented. This generator is consisted of two Isolated three-phase windings. The first windin...
A review on power reducing methods of neural recording amplifiers
Implantable multi-channel neural recording Microsystems comprise a large number of neural amplifiers, that can affect the overall power consumption and chip area of the analog part of the system.power, noise, size and dc...