Performance Studies on the Reversing Valve Incorporated Air-to-Water Heat Pump with Heat Storage Device
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 3
Abstract
In order to avoid the rapid on and off, the condition of partial load is maintained by the heat storage device. With Plate heat exchanger in the air to water heat pump, the heat storage device is for heating along with large variation of supply, defrosting time and return water temperature. A Water tank and an inner double pipe heat exchanger were included in the heat storage device. The heat storage device can able to reduce on and off times by utilizing the compressor in energy storage, as it consists of appendages and electric heater. In electric heater and electric storage, there is a shortage of heating during defrosting. Under partial load, it reduces on and off times by utilizing the compressor in heat storage device by four times per hour rather than six times per hour. The reduction in on and off times were exposed by the plate heat exchanger performance test. Also, there is a reduction of defrosting time in heat storage device with electric heater unit by 78s and 84s. While it reduces to 30.73ºC in plate heat exchanger, many steady running parameters either inlet heating water temperature of heat storage device or heat storage device with electric heater is about 33ºC. Thus, the enhancement in the unit performance in designed heat storage device is obtained. With air to water heat pumps, it is suitable for new projects.
Authors and Affiliations
G. Saravanan, K. G. Muthurajan, M. Arun Kumar
Keywords
Related Articles
- EP ID EP612006
- DOI 10.24247/ijmperdjun201911
- Views 79
- Downloads 0
Studies in Surface Finishing of Inconel718 Flat Surface with Magnetic Abrasive Finishing
With technological developments in manufacturing industry, very hard and tough materials are being developed. Inconel 718 is one such material, which is a nickel based super alloy having high temperature and high-pressur...
DESIGN, DEVELOPMENT AND EXPERIMENTAL EVALUATION OF SOLAR DRYER
A solar dryer was designed, fabricated and installed at Energy Centre, KLEF (Deemed to be University), Vaddeswaram, Guntur District of Andhra Pradesh for drying of chili. The Solar dryer mainly consists of a solar collec...
Impact Analysis of ISO 9001 Certification on Service Companies in Indonesia Using PLS-Sem
More than one million organizations in the world has certified ISO 9001 to improve their performance related to quality, productivity and cost efficiency. The purpose of this study is to confirm that certification of ISO...
The Mathematical Modelling and Performance Evaluation of Paint Manufacturing System using Fuzzy Reliability Approach
In the present paper, we present a novel method for performance evaluation of a paint manufacturing plant in which five subsystems are connected in series configuration. The mathematical modelling of the system is carrie...
Experimental Analysis of Friction Stir Welding of Dissimilar Alloys AA7075 and MG ZE42 Using Butt Joint Geometry
The Aluminium alloy 7075 and Magnesium alloy ZE42 plates of 6 mm thickness are welded in the circular butt joint division by friction stir welding (FSW) process, utilizing vertical processing machine. Method parameters,...