Phase and structural transformations in copper and its alloys under the electrolytic discharge

Journal Title: Journal of Physics and Electronics - Year 2018, Vol 26, Issue 2

Abstract

Copper and its alloy were treated in an electrolytic plasma formed in the boron-containing electrolyte under the action of discharge in order to obtain a diffusion coating with enhanced hardening characteristics and the structural changes in the surface layer of the metal that occur in this case were studied. As a result of processing in electrolytic plasma, characterized by high heating and cooling rates, a diffusion layer was formed on the surface of copper and an alloy based on it (brass). The layer contains nanosized inclusions of copper borides, ternary compounds Cu-B-H, Cu-B-O concentrated mainly along grain and phase boundaries and providing hardening of the metal surface. The action of the discharge provides structural and phase transformations in the metal, the deformation of the grains - elongation in the direction of the driving force (electric transfer) at a depth of 100 μm and the creation of metastable states in the surface layers. Moving vacancies and compressing atoms in the direction of the force create conditions for the rapid movement of boron atoms. With increase in current density and time of treating, the size of nanostructures decreases. Their size is of the order of 6-16 nm. Obtaining wear-resistant coatings on copper and its alloys, which include phases containing copper and boron, increases the strength characteristics of copper and its alloys by 1.5-2 times.

Authors and Affiliations

L. I. Fedorenkova

Keywords

Related Articles

Investigation of the photoluminescence spectra of rare-earth elements in pores of an opal matrix

The main idea of this paper is researching the light emission of Eu3+ and Dy3+ in an opal matrix. The opal synthesis was carried out using Stöber method. The size of globules calculated from the transmission spectrum of...

Optical properties of clusters

In this paper, we discuss in detail the theoretical results obtained with using the local functional density method in parameteric approximation of silicon clusters. One of the main conclusions is that the comparison bet...

On the quantization of charged black holes with allowance for the cosmological constant

The paper considers a spherically symmetric configuration of the gravitational and electromagnetic fields with allowance to the cosmological constant, and its quantization. After dimensional reduction, the original actio...

An integral equation technique for the analysis of phased array antenna with matching step discontinuities

Applying the integral equation method of overlapping partial domains and the Schwartz alternating method to solving an electromagnetic wave diffraction problem is considered in this paper. The infinite rectangular wavegu...

Method of smoothing photoluminescence spectra

The smoothing method for experimental photoluminescence spectra, which uses Tikhonov regularization method, is proposed. Smoothing problem statement is performed as a statement of the minimization problem based on the le...

Download PDF file
  • EP ID EP631718
  • DOI 10.15421/331820
  • Views 127
  • Downloads 0

How To Cite

L. I. Fedorenkova (2018). Phase and structural transformations in copper and its alloys under the electrolytic discharge. Journal of Physics and Electronics, 26(2), 33-36. https://europub.co.uk./articles/-A-631718