PHYSICO-CHEMICAL AND TRIBOLOGICAL PROPERTIES OF DITHIOPHOSPHORIC O,O-DIESTERS
Journal Title: Tribologia - Year 2009, Vol 225, Issue 3
Abstract
The paper contains information about the synthesis of physicochemical and tribological properties of dithiophosphoric acid derivatives. Their thermal, hydrolytic and oxidative decomposition and adsorption on solid surfaces, tribochemical reactions and additive action in friction of metals and ceramics are discussed. Research on decreasing catalytic activity is also presented.<br/><br/>
Authors and Affiliations
Leszek Margielewski, Stanisław Płaza
Keywords
Related Articles
- EP ID EP516663
- DOI -
- Views 44
- Downloads 0
INCREASING THE LIFETIME OF A COUPLE OF CUTTING BLADES FOR PIPE
This investigation seeks to increase the lifetime of a couple of cutting blades pipe. The average life of this pair of blades is about two working shifts, and these blades have fracture and wear problems, which result in...
TRIBOLOGICAL STUDY OF IMPLANTED ARTIFICIAL SPINAL DISC
The article discusses treatments for spinal dysfunction by the implantation of artificial intervertebral discs focusing on the material and structural requirements to be fulfilled by the implant. The final results of tri...
THE IMPACT OF THE TYPE OF CUTTING FLUID ON THE TURNING PROCESS
This article compares the test results concerning the wear of cutting tools after face turning under dry friction conditions and lubricated friction conditions with biodegradable cutting fluid or mineral-oil based emulsi...
THE EFFECT OF THE TYPE OF WALL MATERIAL AND GREASE COMPOSITION PAIRING ON SHEAR STRESSES IN BOUNDARY LAYER
The paper presents the results of research on the influence of fillers introduced into plastic greases on the rheological properties of the boundary layer of the resultant lubricant compositions. The fillers were PTFE an...
MICROHARDNESS ANALYSIS OF SURFACE LAYERS OF ENGINE CYLINDERS IN THE ASPECT OF SCUFFING RESISTANCE
The paper presents test results of engine cylinder in a term of scuffing resistance. The microhardness and Young’s modulus were used to analysis of mechanical properties of new and seized surface of cylinders. The method...