PLASMAION METHODS OF CHANGING OPERATIONAL PROPERTIES OF SURFACE LAYERS OF THE MACHINED PARTS
Journal Title: Вестник Харьковского национального автомобильно-дорожного университета - Year 2018, Vol 82, Issue
Abstract
Problem. Improvement of production is difficult without the use of new progressive technological processes that can increase the resource and reliability, ensure the performance of parts and components in the most difficult operating conditions, at high temperatures and in aggressive environments, the effects of dynamic and contact loads. Goal. The purpose of the work is to study the restoration of the surface layer of the "shaft" type parts of automobile engines and other aggregates by the Plasma Immersion Ion Implantation and Deposition - PIII & D method. Methodology. The system under consideration refers to planar magnetron systems with the structure of a hollow cathode. The technological process involved the following operations: ion puri-fication in a glow discharge in an argon medium when contaminated surface layers are removed; pu-rification and heating in magnetron discharge in argon medium; cementation in a magnetron dis-charge in a medium of methane when the surface is saturated with carbon and the main heating of the substrate is carried out (additional heating is car-ried out, if necessary, by a resistive heater). Results. According to the results of the measurement of mica-hardness, for ion-implanted layers it is possible to achieve a hardness of about HV0.1 = 380, which means that the hardness of the coagulated surface can be increased by 1.8 times. Originality. The construction of the considered cathode allowed the magnetic field lines to come close to the surface where negative displacement potential was applied to the grounded walls of the vacuum chamber. This was necessary to ensure the initiation of a glow dis-charge by creating a configuration of a magnetic system with closed drift of electrons.
Authors and Affiliations
O. O. Baranov, S. S. Horbenko
Keywords
Related Articles
- EP ID EP476731
- DOI 10.30977/BUL.2219-5548.2018.82.0.62
- Views 79
- Downloads 0
[b]CLASSIFICATION OF ENGLISH TERMINOLOGY RELATED TO MACHINES AND EQUIPMENT FOR MOTOR ROAD AND ROAD FACILITY CONSTRUCTION, OPERATION, MAINTENANCE AND REPAIR [/b]
Terminology related to machinery and equipment for motor road and road facility construction, operation, maintenance and repair has been classified. Major groups of the terminology have been considered.
REDUCTION OF ENVIRONMENTAL RISK IN RECYCLING OF SLAG
The article presents the calculation of the level of surface concentrations of pollutants in the ambient air near the blast furnace slag dump of Company limited «Mariupol Metdllurgical Plant».
RESEARCH AND DEVELOPMENT OF VOLUMETRIC BULLDOZER KNIFE SYSTEM WITH SALIENT KNIVES AND LATERAL JOINT PLATES
A task has been offered on research, development and employment of volumetric knife sys-tems to raise the bulldozer productivity by increasing the general digging depth during one passage and improving soil excavation wi...
ТРЕБОВАНИЯ, ВЫДВИГАЕМЫЕ К ПАРАМЕТРАМ ГОРИЗОНТАЛЬНЫХ СКВАЖИН, И ЭФФЕКТИВНОСТЬ БЕСТРАНШЕЙНЫХ МЕТОДОВ ИХ РАЗРАБОТКИ
Рассмотрены требования к параметрам горизонтальных скважин, которые обусловлены диаметром и глубиной прокладываемой коммуникации, а также длиной пересекаемого препятствия. Представлен анализ эффективности установок, прим...
СВАРНЫЕ СОЕДИНЕНИЯ ИЗ ТЕПЛОУСТОЙЧИВЫХ ПЕРЛИТНЫХ СТАЛЕЙ В УСЛОВИЯХ ПОЛЗУЧЕСТИ
Изучение закономерностей скольжения в условиях ползучести сварных соединений из теплоустойчивых перлитных сталей позволяет уточнить механизм их повреждаемости порами, что актуально для уменьшения интенсивности повреждаем...