Polyaniline Composite Membranes Synthesis in Presence of Various Acid Dopants for Pressure Filtration
Journal Title: Jurnal Kejuruteraan - Year 2017, Vol 29, Issue 2
Abstract
Polyaniline is a conductive polymer that is recently used as a material in producing a pressure filtration membrane. Polyaniline can be doped in various acids as dopants of different sizes and shapes to modify its inherent properties to produce membrane with high flux and rejection. This work is aimed to fabricate polyaniline composite membrane in presence of different acids as dopants namely hydrochloric acid, maleic acid, poly(methyl vinylether) acid (PMVEA) and polyacrylic acid (PAA). This polyaniline was coated onto microporous polyvinylidene fluoride (PVDF) support by using a specially fabricated two compartment cell. The field emission scanning electron microscope (FESEM) results show that the morphology of the coated polyaniline on PVDF membrane support is in globular shapes, which elongates at different sizes depending to the acid used. From the thermal analysis, the melting point of polyaniline coated PVDF membrane remains at 260°C, similar as obtained in the pristine microporous PVDF indicating no thermal change upon polyaniline coating. From all membranes prepared, the doped polyaniline membrane possessed a good conductivity value except for polyaniline-PMVEA membrane, which has the lowest value. In terms of the membrane filtration performance, which was measured based on the flux of pure water and polyethylene glycol (PEG) rejection, polyaniline-PMVEA membrane has a high flux and the highest PEG rejection. This result indicates that the conductivity does not influence much on the membrane filtration performance, but rather due to the physical coating itself. Different acid dopants present during polyaniline coating will lead to different filtration performance.
Authors and Affiliations
Rosiah Rohani, Izzati Izni Yusoff, Farah Adlyna Mey Efdi, Mohd Usman Mohd Junaidi, Asif Ali Qaiser
Keywords
Related Articles
- EP ID EP417656
- DOI 10.17576/jkukm-2017-29(2)-08
- Views 95
- Downloads 0
Dish Concentrator Performance Based on Various Materials for Hot Humid Weat
In this paper, three solar dish systems with different reflector materials were experimentally studied for five months. The size each of the solar dish is 32 cm in diameter and 5 cm in depth. The focal length of the dish...
Polyaniline Composite Membranes Synthesis in Presence of Various Acid Dopants for Pressure Filtration
Polyaniline is a conductive polymer that is recently used as a material in producing a pressure filtration membrane. Polyaniline can be doped in various acids as dopants of different sizes and shapes to modify its inhere...
Tensile Properties and Strain Response of Cu-Al Bi-Metal Tube
Recent high price of copper in global market forced the heat, ventilation, and air condition (HVAC) industry players to find alternative materials with relatively lower market price compared to copper such as aluminium f...
Kajian Hubung kait Tekanan dan Suhu Terhadap Taburan Kerpasan di Malaysia Ketika Fenomena ENSO (Study on Precipitation and Its Relation to Pressure and Temperature Over Malaysia During The ENSO Phenomenon)
Climate change is the greatest threat to the environment and human beings in the 21st century. The annual temperature of the earth has been moved up and down a few degrees Celsius over the past few million years ago. The...
Behavioral Analysis of Thermoelectric Module under Different Configurations and Temperature Gradien
This study analyzes the behavior of the thermoelectric module (TEM) in a transient status which allows natural cooling condition. The analysis mainly aims to extract energy from the ordinary heat source and convert it in...