POSSIBILITIES FOR DETERMINING THE INTERFERENCE BETWEEN A POWER SUPPLY NETWORK AND A CONVERTER FED DRIVE
Journal Title: Power Electronics and Drives - Year 2017, Vol 1, Issue 1
Abstract
Background: This article presents the methodology that enables the analysis of the impact of the converter drive on the power supply network and the impact of the network on the drive to be performed. Material and methods: The key points in such an analysis are: the use of an appropriate measuring system that is chosen in terms of possibilities, the ability to take precise measurements, the correct determination of drive parameters, the simulation that reflects the normal behaviour of a system, the determination of quality of operation parameters that are relevant due to the impact of the drive on the power supply network, and arriving at the right conclusions after the analysis. Results: The applied methodology, which allows for the multivariate analysis of the impact of the converter drive on the power supply network and the possibility of analysing the impact of the network on the drive. Conclusions: The comparison of measurement results with the drive simulation results indicate that there is high correspondence between these waveforms, both in reference to the voltages and currents powering the frequency converter and the currents powering the motor.
Authors and Affiliations
Arkadiusz Anyoni Gardecko, Ryszard Beniak
Keywords
Related Articles
- EP ID EP224741
- DOI -
- Views 52
- Downloads 0
Smart Grid Condition Assessment: Concepts, Benefits, and Developments
Background: In this paper, condition assessment of electric grid assets will be discussed and illustrated within the context of smart grid principle. This paper aims to add significant contribution to a smart grid theory...
PERFORMANCE OF SENSORLESS CONTROL OF PERMANENT MAGNET SYNCHRONOUS GENERATOR IN WIND TURBINE SYSTEM
Background: The article presents the sensorless control of permanent magnet synchronous generator (PMSG) in the variable speed wind energy conversion system. The considered system of wind turbine consists of PMSG and bac...
DIRECT FIELD-ORIENTED CONTROL OF SIX-PHASE INDUCTION MOTOR WITH FUZZY-LOGIC SPEED CONTROLLER
Background: The paper presents the Direct Field-Oriented Control of six-phase induction motor with Fuzzy-Logic speed controller. Material and methods: Method of Space Vector Modulation has been used and the Fuzzy-Logic s...
PARAMETRIC ANALYSIS FOR THE DESIGN OF A 4 POLE RADIAL PERMANENT MAGNET GENERATOR FOR SMALL WIND TURBINES
Background: A review of the literature gives some guidelines for the design of a Permanent Magnet Synchronous Generator (PMSG). Material and methods: In this work a deeper analysis of the available topologies applied to...
POSSIBILITIES FOR DETERMINING THE INTERFERENCE BETWEEN A POWER SUPPLY NETWORK AND A CONVERTER FED DRIVE
Background: This article presents the methodology that enables the analysis of the impact of the converter drive on the power supply network and the impact of the network on the drive to be performed. Material and method...