Possibilities of biocompatible material production using conform SPD technology
Journal Title: Archives of Materials Science and Engineering - Year 2017, Vol 1, Issue 88
Abstract
Purpose: At present, materials research in the area of SPD (severe plastic deformation) processes is very intensive. Materials processed by these techniques show better mechanical properties and have finer grain when compared to the input feedstock. The refined microstructure may be ultrafine-grained or nanostructured, where the grain size becomes less than 100 nm. One of the materials used for such processes is CP (commercially pure) titanium of various grades, which is widely used for manufacturing dental implants. The article deals with one of the technologies available for the production of ultrafine-grained titanium: Conform technology. CP titanium processed by CONFORM technology exhibits improved mechanical properties and very favourable biocompatibility, due to its fine-grained structure. The article presents the current experience in the production of ultrafine CP titanium using this technology. The main objective of this article is describing the behaviour of CP titanium during forming in the Conform device and its subsequent use in dental implantology. Design/methodology/approach: In the present study, commercially pure Grade 2 titanium was processed using the CONFORM machine. The numerical simulation of the process was done using FEM method with DEFORMTM software. The evaluation was performed by simple tensile testing and transmission electron microscopy. The first conclusions were derived from the determined mechanical properties and based on analogies in available publications on a similar topic. Findings: This study confirmed that the SPD process improves mechanical properties and does not impair the ductility of the material. The CONFORM process enables the continuous production of ultrafine-grained or nanostructured materials. Research limitations/implications: At the present work, the results show the possible way of continuous production of ultrafine-grained or nanostructured materials. Nevertheless, the further optimization is needed in order to improve the final quality of wires and stabilize the process. As these factors will be solved, the technology will be ready for the industry. Practical implications: The article gives the practical information about the continuous production of ultrafine-grained pure titanium Grade 2 and the possibility of use this material for dental implants. Originality/value: The present paper gives information about the influence of the CONFORM technology on final mechanical and structural properties with the emphasis on technological aspects
Authors and Affiliations
J. Palán, L. Maleček, M. Zemko
Keywords
Related Articles
- EP ID EP249076
- DOI 10.5604/01.3001.0010.7746
- Views 63
- Downloads 0
Synthesis and characterization of luminescent Er, Nd and Dy doped Ba3BP3O12
Purpose: Purpose of this study, our aim is high temperature based on synthesis method of barium borophosphate and doping with lanthanide type metals such as Er, Nd and Dy into the structure by solid state reaction. Desig...
Effect of h-BN solid nano lubricant on the dry sliding wear behaviour of Al-B4C nanocomposites
Purpose: In this paper, three composites with different B4C content and fixed h-BNnanoparticles reinforced aluminium composites were fabricated through ultrasonic cavitationassisted casting. The role of the B4C and h-BN...
Possibilities of biocompatible material production using conform SPD technology
Purpose: At present, materials research in the area of SPD (severe plastic deformation) processes is very intensive. Materials processed by these techniques show better mechanical properties and have finer grain when com...
Preparation and investigations of electrical and optical properties of thin composite layers PAN/SiO2, TiO2 and Bi2O3
Purpose: The aim of this study was to present the influence of mass concentration of the reinforcement phase on the structure and optical properties of the obtained composite thin films with a polymer matrix reinforced b...
Modelling of the effects of laser modification of gas-nitrided layer
Purpose: The effects of laser processing parameters on the dimensions of simple laser tracks, produced on the previously nitrided layer, were analysed. Design/methodology/approach: Gas nitriding is one...