Power Characteristics of Mulcher Joints When Removing Tree and Shrub Vegetation
Journal Title: Lesnoy Zhurnal (Russian Forestry Journal) - Year 2021, Vol 12, Issue 2
Abstract
In recent years, the enterprises of forestry and the Ministry of Energy of the Republic of Belarus and other countries widely implemented advanced milling tools designed to chop wood, stumps and roots without immersing the cutter in the soil (mulchers) and with immersion (rotovators), which allows you to prepare the ground for planting forest crops. They can be mounted on multi-purpose tractors, loaders and excavators. At the same time, there are no methods that allow carrying out a reasonable choice of technological equipment for a particular basic machine, since a significant number of production, technological and technical factors have an impact on the emerging power and capacity parameters. The proposed method allows taking into account a significant number of variable values (working methods, speeds of various operations, parameters of the working body, its drive and base chassis, soil conditions, etc.) and simulate the interaction of milling tools under various operating conditions. It was found that the greatest loads on the mulcher rotor occur during the felling of tree and shrub vegetation, which is associated with an increase in the area of interaction between the cutters and the wood up to 2 times compared with the chopping of similar lying stands. This value can be reduced by 15–30 % depending on the diameter of the trunks being processed. In the case of a significant amount (cluster) of forest stands with a diameter of more than 10 cm, it is preferable to carry out work at a speed of about 0.2 m/s or advanced felling of these trees. The use of hydraulic travel (speed) reducers or hydrostatic transmission is promising in order to reduce dynamic loads and get better adaptability of the working equipment to natural-production conditions (the ability to work at a speed from 0 to 5 km/h). It should be noted that the installed required engine power for the milling equipment drive should be increased by 10–15 % due to the needs of the drive of various equipment located on the base chassis. Also, in the case of the integrated use of tree and shrub vegetation, it is possible to use mulchers that collect biomass; however, this will require additional energy costs. In this regard, the method can be applied when choosing the parameters of technological equipment for the existing base chassis, to solve the inverse problem, and also to select the operating mode of the milling equipment depending on the natural and production conditions with the possibility of subsequent prediction of the effectiveness of the work performed. For citation: Ariko S.Ye., Voinash S.A., Kononovich D.A., Sokolova V.A. Power Characteristics of Mulcher Joints When Removing Tree and Shrub Vegetation. Lesnoy Zhurnal [Russian Forestry Journal], 2021, no. 2, pp. 130–142. DOI: 10.37482/0536-1036-2021-2-130-142
Authors and Affiliations
S. Ye. Ariko, S. A. Voinash, D. A. Kononovich, V. A. Sokolova
Keywords
Related Articles
- EP ID EP693564
- DOI https://doi.org/10.37482/0536-1036-2021-2-130-142
- Views 207
- Downloads 0
The Results of the Study of the Relationship between Viscosity and Mechanical Strength of Bleached Hardwood Kraft Pulp
An assessment has been made of the relationship between viscosity and mechanical strength of industrial samples of bleached hardwood kraft pulp. To produce this type of semi-finished product, birch and aspen wood has bee...
The Model of Birch-Spruce Plantations Formation in the Conditions of the Russian Plain Southern Taiga
The results of 30 years or research on the formation and growth of birch forests from the subcanopy spruce population in the conditions of the Russian Plain southern taiga are presented. The studies have been carried out...
Calculating the Groundwork Volume for the Construction of Logging Roads
Organizational and engineering models provide a formalized description of the construction process, including a list of operations, their sequence, description of the relationship between the operations, and the features...
Optimization of Structural Parameters by Improvement of Pneumohydraulic Fifth-Wheel Coupling Device at Semitrailer Hauling Rig
In this study, the benefits of logging transportation under modern conditions by semitrailer hauling rig are examined, which consists of a truck tractor connected to a semitrailer. Furthermore, an analysis is made of the...
Monitoring and Control of Paper Web Moisture
Product quality is a key indicator of the positive outcome of pulp and paper production. Moisture content is one of the main paper quality characteristics. The moisture profile across the paper web width shows possible s...