Power-Supply Systems Reliability Control
Journal Title: EAI Endorsed Transactions on Energy Web - Year 2018, Vol 5, Issue 19
Abstract
System reliability control is proposed to maintain through the usage of the operating time between the system components' failure. Usually, trouble-free (reliability) is assessed considering component failures. Almost all the system probabilistic parameters were determined via the component failures. The system reliability control requires another approach to solve this kind of problem. The first thing is a rational system component selection, which is necessary to provide its reliable functioning in the process of exploitation, safe maintenance, cost-effective mounting and dismounting. Secondly, the components must meet technical and economic feasibility requirements. They cannot be used with high or low capacity. If the component capacity is overrated, you bear unjustified costs, i.e. you pay an increased price for the purchase of spare parts and new components if they are replaced. In case of the low capacity increasing loads on the system cause its component load increase, which leads to the breakdown. Prevention of the occurrence of failures in the system, will increase the system's trouble-free and, therefore, its reliability. Therefore, the system reliability can be controlled.
Authors and Affiliations
A. N. Shpiganovich, V. I. Zatsepina, A. A. Shpiganovich, V. M. Stepanov
Keywords
Related Articles
- EP ID EP45378
- DOI http://dx.doi.org/10.4108/eai.10-7-2018.155083
- Views 269
- Downloads 0
Machine-Converter Voltage Source for Autonomous Systems of Distributed Power Supply
The paper presents electric Machine-Converter Voltage Source (MCVS) for systems of distributed power supply with shaping output voltage in an electric machine (generator). The MCVS consists of electric machine and a cycl...
New numerical sizing approach of a standalone photovoltaic power at Ngoundiane, Senegal
A new sizing method based on a numerical approach using the average meteorological data and the load demand of the Ngoundiane site along with both concepts of ALPSP and TLCC is treated in this study. The intuitive method...
Methodology for Commercial Buildings Thermal Loads Predictive Models Based on Simulation Performance
Commercial buildings incorporate Building Energy Management Systems (BEMS) to monitor indoor environment conditions as well as controlling Heating Ventilation and Air Conditioning (HVAC) systems. Measurements of temperat...
Estimation of Municipal Solid Waste (MSW) combustion enthalpy for energy recovery
The global challenges of climate change have been compounded by an unprecedented level of environmental pollution consequent upon the municipal solid waste, MSW generation. Recent advances by researchers and policymakers...
Thermal processes of the isolating materials in problems of nondestructive diagnostics of the main and power supply systems
Methods of calculation of thermal processes of the isolating materials are considered, in problems of nondestructive diagnostics of the main and distributive power stations. Theoretical justification of calculation of th...