Predicting Whole-body Vibration-based on Linear Regression Models and Determining Permissible Exposure Time of Tractor Operator
Journal Title: Journal of Agricultural Machinery - Year 2023, Vol 13, Issue 2
Abstract
IntroductionThe permissible exposure time to vibration for the operator is one of the key factors in maintaining the operator's health while optimizing machinery and equipment. The tractor studied was the ITM475, manufactured in Iran. The purpose of this study was to calculate the operator's permissible vibration exposure time while using the tractor to ensure the driver can maintain good bodily health.Materials and MethodsIn this study, experiments were conducted using a 3-axis vibration meter based on the ISO 2631 standard. The obtained data were analyzed through a factorial experiment using 18 treatments and 3 replications. The factors studied were engine rotation speed (at three levels of 1000, 1500, and 2000 rpm), road type (dirt and asphalt), and gear position (at three levels of 1, 2, and 3).Results and DiscussionVarious total vibration models were obtained for the tractor, and their determination coefficient varied from 90.11% for gear No. 3 on an asphalt road to 100% for gear No. 1 on an asphalt road and gear No. 2 on a dirt road. The maximum whole-body vibration, and consequently the minimum permissible exposure time, was observed for gear No. 3 at an engine rotation speed of 2000 rpm on a dirt road, which was 1.49 and 1.16 hours, respectively.ConclusionThe maximum whole-body vibration experienced during an 8-hour tractor-driving session was measured at 0.85 m s-2. It is important to note that the permissible exposure time decreases as vibration levels increase, and it reaches a limit of 1.16 hours. To ensure drivers adhere to these permissible exposure times across various driving conditions, measures must be implemented to reduce tractor vibration and minimize its transmission to the driver. By reducing overall tractor vibration and minimizing its impact on the driver, it becomes possible to increase the permissible exposure time for drivers.
Authors and Affiliations
A. Mohammadi,K. Kheiralipour,B. Ghamari,A. Jahanbakhshi,R. Shahidi,
Keywords
Related Articles
- EP ID EP718070
- DOI https://doi.org/10.22067/jam.2021.73589.1071
- Views 63
- Downloads 0
Energy indices in irrigated wheat production under conservation and conventional tillage and planting methods
Introduction: Conservation tillage system was recommended for soil erosion control in North America for the first time 60 years ago (Wang et al., 2006). Using this tillage system including minimum and zero tillage has be...
Effect of Tillage Systems with Corn Residue on Grain Yield of Rapeseed in Moghan Region
This study carried out to evaluate the effect of different tillage systems on rapeseed yield (hayola 401) planted in corn residues. This experiment was done in Moghan region with clay soils during 2009-2012. Different se...
Degree-Day Index for Estimating the Thermal Requirements of a Greenhouse Equipped with an Air-Earth Heat Exchanger System
In this research, an attempt was made to utilize an Earth-Air Heat Exchanger (EAHE) system as a source of shallow geothermal energy to provide thermal demands of a commercial greenhouse located in Alborz province, Iran....
Prioritization of Strategic Agricultural Crops in Alborz Province Using the Fuzzy Delphi Method and The Analytical Hierarchy Process (AHP)
Alborz province with an area of about 5121.7 km2 has about 0.31% of the total area of the country. The total arable area of the province is about 48954 hectares. Water, land and capital are the most important factors for...
Study and Determining Power, Fuel Requirements and Some Soil Physical Properties in Several Tillage Methods
Using the cropping operations program can significantly save fuel consumption and energy efficiency. Prediction of the accurate amount of fuel requirements for tillage operation of the soil is difficult. Changes in humid...