PREPARATION AND APPLICATION OF MOLECULARLY IMPRINTED FIBER-FI LLED NEEDLE TRAP EXTRACTION DEVICE IN REAL SAMPLES

Journal Title: Topics in Chemical & Material Engineering (TCME) - Year 2018, Vol 1, Issue 1

Abstract

In this study, a needle trap extraction device with a molecularly imprinted polymer coated on Dupont fibers was developed for extraction. A number of heat-resistant Dupont fibers were longitudinally filled into a glass capillary, followed by coating with a molecularly imprinted polymer as an extraction medium and were used to extract volatile organic compounds from environment. Subsequently, the extracted analytes were analyzed by gas chromatography. The linear detection range, recovery, limit of detection (LOD), limit of quantification (LOQ) was studied to evaluate the method. Calibration curves for benzene, toluene, ethylbenzene, and o-xylene were linear in the concentration range of 1–250 μg/L, and the corresponding correlation coefficients exceeded 9897. The LODs and LOQs of the analytes were in the ranges of 15–25 ng/L and 35–65 ng/L, respectively

Authors and Affiliations

Xiaoyang Guo, Xiyue Wang, Bo zhu, Lili Lian, Hao Zhang, Wenxiu Gao, Yuanyuan Tian, Dawei Lou

Keywords

Related Articles

THE APPLICATION OF WIRELESS NETWORK DATA ACQUISITION TECHNOLOGY IN HEATING SYSTEM

This paper mainly adopts STM32 embedded microprocessor technology, ZigBee short-range wireless ad hoc network communication technology, Internet technology and Internet communications network database technology to achie...

RESEARCH ON SELF BALANCING VEHICLE CONTROL BASED ON KINECT HUMAN POSTURE RECOGNITION

The design of two wheeled self balancing vehicle was based on human posture recognition. The PC was used to obtain the human bone tracking data through Kinect camera and displayed it on the screen. By recognizing human m...

PREPARATION AND CHARACTERIZATION OF CATALYST FOR REDUCTION AMINATION OF ETHANOLAMINE BY DIFFERENT METHOD

The NiO-CuO-CaO/Al2O3 composite oxide catalyst was prepared by impregnation method, CO-precipitation method and grinding microwave method with Al2O3 as carrier, Ni-Cu bimetal as active component and Ca as additive. And t...

SHOT CUT DETECTION WITH SLIDING CORRELATION IN DCT DOMAIN

In this paper, we propose a shot cut detection algorithm in JPEG compressed domain. We show that, with the same content-based shot cut detection algorithm, adding sliding correlation to the existing operational process c...

RESEARCH PROGRESS OF PHENOTHIAZINE COMPOUNDS OF DIOXOPROMETHAZINE HYDROCHLORIDE

With the development of science and technology and the progress of society, people are paying more attention to the environment and energy while paying attention to production and benefits. Phenothiazine compounds are ve...

Download PDF file
  • EP ID EP414797
  • DOI 10.26480/icnmim.01.2018.303.305
  • Views 52
  • Downloads 0

How To Cite

Xiaoyang Guo, Xiyue Wang, Bo zhu, Lili Lian, Hao Zhang, Wenxiu Gao, Yuanyuan Tian, Dawei Lou (2018). PREPARATION AND APPLICATION OF MOLECULARLY IMPRINTED FIBER-FI LLED NEEDLE TRAP EXTRACTION DEVICE IN REAL SAMPLES. Topics in Chemical & Material Engineering (TCME), 1(1), 303-305. https://europub.co.uk./articles/-A-414797