Preparation and characterization of nano magnetic fluid for automotive applications
Journal Title: Archives of Materials Science and Engineering - Year 2019, Vol 2, Issue 96
Abstract
Purpose: of this paper is to prepare a nano magnetic fluids with nano additives to have the combined characteristics of high yield stress and better magnetic properties for smart vehicles. This study focuses on increasing the sedimentation time of the fluid using suitable nano additive nickel along with graphene as fillers. Design/methodology/approach: Magnetic nano sized nickel particle based electro- magneto-rheological fluid was prepared and graphene nanoparticle with thickness less than 10nm was introduced as an additive to reduce its sedimentation. This added plate like graphene acts as filler which seals the interfaces of nickel particles and thereby it improves the resistance to sedimentation. Triton X 100 was added as the surfactant for the fluid to reduce the agglomeration of the particles. Findings: Morphology of pure nickel and graphene were examined using scanning electron microscopy (SEM) images. Research limitations/implications: The important limitations is that freely dispersed micron sized iron particles could settle over a period of time, in the form of cakes at the bottommost, and it is tedious to recuperate as dispersed phase. In this investigation, nano sized nickel particles were used as additive to reduce the sedimentation of micron sized iron particles so that, the mixture is homogeneous for extended period of time. In future, addition of different types composite additives in the magnetorheological fluid could be made for the better sedimentation control. Practical implications: The sedimentation problem is one of the major drawback in the smart fluids, which can be eliminated by adding nano particles. For conventional fluid, the complete sedimentation will occur in 2 hours while the improved nano magnetic fluid with additive has good resistance to settle the micron sized iron particle up to 10 hours. Originality/value: To prepare a low cost magnetorheological fluid with nano additives like nickel particles along with fillers as graphene nano particles. With this addition of nickel and inclusion of graphene, the sedimentation problem in magnetorheological fluids is significantly reduced. This magnetorheological fluids can be used in brakes and dampers of automobiles.<br/><br/>
Authors and Affiliations
J. Thanikachalam, P. Nagaraj, S. Karthikeyan
Keywords
Related Articles
- EP ID EP599666
- DOI 10.5604/01.3001.0013.2384
- Views 78
- Downloads 0
Fabrication of dye sensitized solar cell using chemically tuned CuO nanoparticles prepared by sol-gel method
Purpose: This work details about the isolation of CuO nanoflakes by a simple precipitationtechnique. Further it is coated over ITO substrate using spin coating technique. DSS cellcapabilities were checked by placing a dr...
Metallic skeletons as reinforcement of new composite materials applied in orthopaedics and dentistry
Purpose: The article concerns the development of completely new groups of composite materials that can be used to produce functional replacements for damaged bones or teeth. Design/methodology/approach: A selective laser...
Effect of plastic deformation rate at room temperature on structure and mechanical properties of high-Mn austenitic Mn-Al-Si 25-3-3 type steel
Purpose: The aim of the paper is to determine influence of plastic deformation rate at room temperature on structure and mechanical properties of high-Mn austenitic Mn-Al-Si 25-3-3 type steel tested at room temperature....
Preparation and investigations of electrical and optical properties of thin composite layers PAN/SiO2, TiO2 and Bi2O3
Purpose: The aim of this study was to present the influence of mass concentration of the reinforcement phase on the structure and optical properties of the obtained composite thin films with a polymer matrix reinforced b...
Surface morphology and topographical studies of fluorine doped tin oxide as transparent conducting film
Purpose: This paper deals about the preparation and characterization of transparentconducting metal oxide doped with fluorine for superhydrophobic applications.Design/methodology/approach: Fluorine doped tin oxide(FTO) h...