Preparation of a Kind of Non-Woven Viscose Colour Absorbing Material and Research of its Colour Absorption Properties
Journal Title: Fibres and Textiles in Eastern Europe - Year 2019, Vol 27, Issue 3
Abstract
A non-woven viscose material was modified with self-made cationic gelatin protein auxiliary by the padding process. The material prepared was then used as an environmentally friendly colour absorbent for the decolourisation of dye wastewater. The effects of the sodium hydroxide swelling pretreatment process and cationic padding modification process on the colour absorption and decolourisation rate were discussed. Moreover an optimal preparation process for the colour-absorbing material was determined. This was as follows: In order to make the non-woven viscose material swell and improve the subsequent modification effect, first the non-woven viscose material was pretreated with an aqueous solution containing 50 g/l of sodium hydroxide, at room temperature, for 5 min. Then the material was padded in a mixed aqueous solution containing 80 g/l of cationic gelatin and 18 g/l of sodium hydroxide by means of a laboratory padder with two dips and two nips. After treatment, the material was dried and steamed for 4 min. Lastly the material was washed with water and dried. The results show that the colour-absorbing material prepared by this process has the advantages of a high colour absorption rate and high decolourisation percentage. And it could be applied to the decolourisation of printing and dyeing wastewater, or to prevent washed off dyestuff staining on light colour clothes in the process of laundry.<br/><br/>
Authors and Affiliations
Xueyan Wang, Yuanjun Liu, Rong Lv
Keywords
Related Articles
- EP ID EP518585
- DOI 10.5604/01.3001.0013.0745
- Views 92
- Downloads 0
Influence of Fibre Length and Preparation on Mechanical Properties of Carbon Fibre/Polyamidea 6 Hybrid Yarns and Composites
The aim of this paper was to investigate the effect of carbon fibre (CF) length and preparation prior to carding on the mechanical properties of hybrid yarns as well as composites consisting of CF and polyamide 6 (PA 6)....
Novel and Efficient Method to Reduce the Jute Fibre Prickle Problem
The physical especially bending properties of jute fibres treated with dimethyl sulphoxide (DMSO) were studied in this work. To the knowledge of these authors, the influence of DMSO treatment on the prickle properties of...
Porosity of Knitted Fabrics in the Aspect of Air Permeability - Discussion of Selected Assumptions
The main focus of this paper is to look into the relationship between the structure and air permeability of single jersey knitted fabric – especially verifying some basic assumptions. First, if it is possible to neglect...
Antibacterial and Wrinkle Resistance Improvement of Nettle Biofibre Using Chitosan and BTCA
In this study, the possible improvement of the antibacterial and wrinkle resistance performance of 100% nettle fabrics was investigated. To realise this aim, antibacterial and wrinkle resistance finishing processes were...
Wytwarzanie i właściwości tekstylnych biokompozytów o matrycy z PLA wzmocnionej dzianinami rządkowymi z lnu i mieszanek len/PLA
Zaproponowano technologię wytwarzania ekologicznych tekstylnych kompozytów o matrycy z PLA wzmocnionej dzianinami rządkowymi z lnu i mieszanek len/PLA nie poddanych żadnej dodatkowej obróbce chemicznej. Wykonano 5 próbek...