Preparation of Copper Sulfide Deposition on Modified Poly(Ethylene Terephtalate) Fibres with Good Conductivity
Journal Title: Fibres and Textiles in Eastern Europe - Year 2018, Vol 26, Issue 1
Abstract
The immobilization of CuS on the surface of poly (ethylene terephtalate) (PET) fibres was carried out by the functionalization of PET fibres with chitosan (CS), followed by the chemical deposition method. Crosslinked chitosan with NH2 functionality was used as a chelator to absorb copper ions, which can successfully initiate CuS deposition in the following chemical deposition stage. The CuS-loaded fibres were characterised by scanning electron microscopy, X-ray diffraction, infrared spectroscopy and thermal gravimetry, respectively. The properties of tensile and conductivity were also investigated. The lowest surface resistance 42 Ω/cm of the treated PET fibres was obtained when the CS concentration was 1.0%.
Authors and Affiliations
Iwona Frydrych, Xie Juan
Keywords
Related Articles
- EP ID EP249701
- DOI 10.5604/01.3001.0010.7792
- Views 78
- Downloads 0
Formowanie i antybakteryjne właściwości elektroprzędzionych włóknin PVA zawierających małe ilości nanocząstek srebra
Celem badań było wyprzędzenie włóknin z alkoholu poliwinylowego składających się z cienkich (nano-/mikro-) włókien zawierających małe ilości nanocząstek srebra. Badano wpływ ilości nanocząstek srebra na strukturę i właśc...
Preparation of Self-cleaning Polyester Fabrics by Chemical Vapor Deposition of Methyltrichlorosilane/Dimethyldichlorosilane
Self-cleaning polyester fabrics were prepared by a simple gas phase deposition procedure in which a layer of polydimethylsiloxane nanofilaments was grown onto textile fibers. Superhydrophobic and self-cleaning properties...
Modeling the Performance of Horizontal Anchor Lines During Fall Arrest
The basic materials used for the construction of anchor lines for personal equipment protection against falls from a height are ropes and textile webbing. During fall arrest, horizontal anchor lines significantly affect...
Surface and Structural Damage to PLA Fibres during Textile Pretreatments
PLA knitted fabric was treated with sodium carbonate in the presence of non-ionic detergent at various concentrations and temperatures in a short liquor bath. The scoured fabric was subsequently treated with industrially...
Key Variables in the Control of Lead Time in Spinning Mills
An investigation of various factors which affect the lead time in spinning mills which produce 14.76 tex (40 Ne) carded yarns linear density is reported. For this study, data were collected from 27 mills producing 14.76...