Preparation of Ionic Liquid Supported Metal Frame Py/MOF-199 and Its Adsorption Desulfurization Performance
Journal Title: Progress in Energy & Fuels - Year 2012, Vol 1, Issue 1
Abstract
The metal framework MOF-199 (Cu-BTC) was prepared and the [Hnmp][H2PO4] ionic liquid was loaded onto MOF-199 to synthesize the ionic liquid supported metal framework Py/MOF-199. The adsorbent was characterized by X-ray diffraction, infrared spectroscopy, scanning electron microscopy and specific surface area. The effects of pretreatment conditions of MOF-199, ionic liquid loading mode, loading, load temperature and loading time on the adsorption and removal performance of thiophene were investigated. The preparation conditions and adsorption desulfurization conditions of the adsorbent were optimized by orthogonal experiment. The results show that Py/MOF-199 obtained by ionic liquid modification maintains the regular octahedral structure of MOF-199. The suitable preparation conditions for Py/MOF-199 are as follows: pretreatment of MOF-199 by vacuum Soxhlet extraction and vacuum drying, followed by solvothermal loading [Hnmp][H2PO4], load temperature of 50 ° C, load The time is 8h and the load is 7%. The order of influence of various factors on the desulfurization performance of the adsorbent is: load temperature>loading time>ionic liquid loading. Suitable Py/MOF-199 adsorption desulfurization conditions are: simulated oil is 10mL, adsorbent dosage is 0.2g, adsorption temperature is 70 °C, adsorption time is 1h. Under these conditions, the thiophene removal rate can reach 96.7%.
Authors and Affiliations
Xinghe Zhu
Keywords
Related Articles
- EP ID EP680173
- DOI -
- Views 233
- Downloads 0
Effect of Olefins on Desulfurization Mechanism of Thiophene Adsorption on Active Site Species of Mesoporous Molecular Sieve Al-MCM41
The Al-MCM-41 and Molecular Sieve with different aluminum loadings were prepared by post grafting method. Characterization of Molecular Sieves by XRD, N2 Adsorption- Desorption NH3-TPD, Py-FTIR and other methods. Evaluat...
Application of low nitrogen combustion technology in hedging combustion boilers
As our economy continues to grow,Increasing emphasis on energy consumption.current,NOx has been included in our environmental protection 12 planning requirements,the reduction of nitrogen energy is a problem that the wil...
Development of using Non-edible Biomass to prepare ethanol fuel
Clean and renewable Energy. At present, using non-edible Biomass as raw material to prepare renewable ethanol fuel has been concerned by a growing number to researchers. This article focused On the Preparation of of etha...
Preparation of Ionic Liquid Supported Metal Frame Py/MOF-199 and Its Adsorption Desulfurization Performance
The metal framework MOF-199 (Cu-BTC) was prepared and the [Hnmp][H2PO4] ionic liquid was loaded onto MOF-199 to synthesize the ionic liquid supported metal framework Py/MOF-199. The adsorbent was characterized by X-ray d...
Study on Hydrotalcite-like Derived Zn-Ni-Al-Fe-O Catalyst for AutoThermal Reforming of Acetic Acid to Produce Hydrogen
Zn2.4 Ni0.6 AlxFe1－xO4.5±δ(x=1/0.5/0) series of hydrotalcite-like nickel-based catalysts were prepared by coprecipitation method, which were used for autothermal reforming of acetic acid to produce hydrogen. The catalys...