Probabilistic Modeling and Performance Analysis of A 2(K)-Out-Of-3(N) System with Inspection Subject To Operational Restriction
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2014, Vol 4, Issue 1
Abstract
In repairable redundant the failed units can either be repaired or replaced by identical standby to reduce the system down time. The failed units are inspected for repair/replacement. In this paper, one stochastic model for 2(k)-out-of-3(n) redundant system of identical units with repair and inspection are examined stochastically. The system is considered in up-state only if 2(k)-out-of-3(n) units are operative in this model. Normally, the server either attends the system promptly or may take some time, after failure. The system is studied under an operational restriction on the inspection i.e. in case when system has only one unit in operational mode the server has to attend the system for inspection. Semi- Markov processes and regenerative point technique is adopted to obtain the expressions for measures of system effectiveness such as transition probabilities, mean sojourn times, to system failure , steady state availability, busy period, expected number of visits etc. Cost-analysis is also carried out for the system model.
Authors and Affiliations
G. Mokaddis
Keywords
Related Articles
- EP ID EP126158
- DOI -
- Views 122
- Downloads 0
The Effect of Design Parameters of an Integrated Linear Electromagnetic Motor, At the Process of Pulling Away Anchor, From Its Breakaway Stage
This paper assess the influence of design parameters of ferromagnetic guide housing at the possess of pulling away the anchor from the holding device which is integrated in the design of the motor.The design of an integr...
Probabilistic Modeling and Performance Analysis of A 2(K)-Out-Of-3(N) System with Inspection Subject To Operational Restriction
In repairable redundant the failed units can either be repaired or replaced by identical standby to reduce the system down time. The failed units are inspected for repair/replacement. In this paper, one stochastic model...
Analysis and Design of Transmission Tower
In this thesis Analysis and Design of narrow based Transmission Tower (using Multi Voltage Multi Circuit) is carried out keeping in view to supply optimum utilization of electric supply with available ROW and increasing...
Micro-Electromechanical Systems (Mems)
Micro-electro-mechanical systems (MEMS) have been identified as one of the most promising technologies and will continue to revolutionize the industry as well as the industrial and consumer products by combining si...
Simulation and Analysis of a D-STATCOM for Load Compensation and Power Factor Improvement
Power Generation and Transmission is a complex process, requiring the working of many components of the power system in tandem to maximize the output. One of the main components to form a major part is the reacti...