Process of quality improvement in the company producing building materials
Journal Title: Production Engineering Archives - Year 2013, Vol 0, Issue 1
Abstract
The aim of the study was to identify the problems and improve the pro-duction of cement in a ball mill in terms of technology and management associated with the use of known methods and techniques to improve quality. A detailed analysis helped to explain the process which affects the efficiency of grinding cement and which is the most common cause of disturbance and incompatibilities in the process of milling, how the production process is managed and controlled in order to obtain the required grain size, which is the main parameter influencing the quality of the manufactured product. To manage the change of the process there has been used a value stream map for analysis of the intermediate pro-cess of cement production, transport to the silos, bagging and selling. Based on the research some proposals of the process improvement have been designed that might have a chance of implementation and execu-tion.
Authors and Affiliations
Piotr Sygut
Keywords
Related Articles
- EP ID EP166469
- DOI -
- Views 82
- Downloads 0
The application of the FMEA method in the selected production process of a company
The aim of this article is to show the use of the analysis of the failure causes and effects as a preven-tion tool in controlling the quality of a given production process in the company. The scope of the work covers an...
Analysis of risk of nonconformities and applied quality inspection methods in the process of aluminium profiles coating based on FMEA results
In the aerospace industry, passenger safety depends on proper quality control at each production stage. The main responsibility for the correct operation of the aircraft lies within a gas turbine. A proper and rigorous s...
Influence of long-term heating on the fatigue properties of low-alloyed cast steel STN 42 2707
In this paper the authors publish own experimental results of examination of low-alloyed cast steel STN 42 2707 fatigue properties (near- threshold regime of fatigue crack propagation for rates from da/dN =5.6x10-9m.cycl...
Influence of load and reinforcement content on selected tribological properties of Al/SiC/Gr hybrid composites
Hybrid materials with the metal matrix are important engineering materials due to their outstanding mechanical and tribological properties. Here are presented selected tribological properties of the hybrid composites wit...
Rapid prototyping in medical sciences
Even if it sound a bit incredible rapid prototyping (RPT) as production method has been used for decades in other professions. Nevertheless medical science just started discover the possibilities of this technology and u...