Process Parameter Optimization of Electric Discharge Machining By Response Surface Methodology
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2016, Vol 4, Issue 9
Abstract
Electrical Discharge Machining (EDM) is a modern manufacturing process machining process, where electrically conductive material is removed by controlled erosion through a series of electric sparks of short duration and high current density between the electrode and the work piece were both are submerged in a dielectric bath, containing kerosene or distilled water . During this process thousands of sparks per second are generated, and each spark produces a tiny crater in the material along the cutting path by melting and vaporization. Generally the material is removed by erosion process. The top surface of the work piece subsequently resolidifies and cools at a very high rate. The application of this process is mostly found in press tools and dies, plastic moulds, forging dies, die castings, aerospace, automotive, surgical components manufacturing industries etc. This process is not restricted by the physical and metallurgical properties of the work material as there is no physical contact due to high energy electrothermal erosion between the tool and the work piece.
Authors and Affiliations
S. A. Sayyad, A. N. Chapgaon
Keywords
Related Articles
- EP ID EP22645
- DOI -
- Views 216
- Downloads 5
Design and Manufacturing of Mini CNC Plotter Machine
This paper describes a low cost serial communication based mini CNC Plotter Machine based on open source software and hardware. Mini CNC Plotter Machine is an embedded system that works on the Principle on ‘Computer Num...
Batteryless Mobile using Supercapacitor with Wireless Charging
In the current world of technology, we introduce to many new electronic gadgets. As the rate of population increases the use of this electronic gadgets are also increasing rapidly. All this electronic gadgets are run on...
Improvement of Subgrade Clayey Soil using Eggshell
Eggshell powder has not been used as a stabilizing material however, it could be a replacement for other types of stabilization. This study is aimed at determining the geotechnical properties of eggshell stabilized kutt...
To improve cp and cpk of keystone angle and Axial height in piston ring on Katoka ks grinder
In present generation, agile manufacturing machine and their automation becoming more complex. The manufacturing company changes their production system over year. Competition has increase dramatically. Customer focus p...
A Review On Data Transmission Through Illumination
Li-Fi is a new wireless technology which provides the connectivity within localized network environment. The main principle of this technology is we can transmit the data using light illumination by using light emitting...