Production effectiveness of the screw sectional operating members design
Journal Title: Вісник Тернопільського національного технічного університету - Year 2015, Vol 79, Issue 3
Abstract
Screw operating members have been widely applied in all branches of the national economy thanks to the combination of different operations while transporting. Specific feature of their operation is caused by the variety of the production processes operations, as well as the regional characteristics of the transported materials, designation and design parameters of screw mechanisms. Original welded construction of the screw sectional operating member of small material consumption, high maneuverability and improved operation reliability and durability has been proposed. The operation of the screw operating member is as follows. During rotation of the spiral section the rotary motion is transmitted through the running body to the spherical rod and neighboring sections of the screw operating member. The advantages of the operating member are those, that while adjusting of this unit complicated technological equipment is not needed. All equipment is normalized and provides proper maintenance and replacement. At the stage of technical project the construction and its adjusting units, are created, the design shape of all parts, loading devices, operating member, itc is determined. The proper choice of the spiral surface shape prevents the appearance and creation of so-called “dead area”, which can occur while gripping and transporting of materials. At this stage the problems of production effectiveness of methods for producing blanks, in the case when they are used for winding of the profile-shaped spirals in particular, are solved. Besides, the choice of technological process for parts working, the adjustment of units and it self are carried out. Production effectiveness of the unit design mastering must result in the raise of labor efficiency, reduction of expenses and shortening of time for designing, technological preparation of production, manufacturing, maintenance and repair of the product providing its high quality.
Authors and Affiliations
Ivan Hevko, Volodymyr Klendiy
Keywords
Related Articles
- EP ID EP571211
- DOI -
- Views 50
- Downloads 0
Features of statistical data processing at insulation testing of enameled electric wires
The necessity of checking of variation series of voltage by insulation breakdown of enameled wire for the sharply differing values from statistical laws is substantiated. The need for additional research of causes of abn...
Production effectiveness of the screw sectional operating members design
Screw operating members have been widely applied in all branches of the national economy thanks to the combination of different operations while transporting. Specific feature of their operation is caused by the variety...
Influence of threshing drum's disbalance in combine harvester on its vibration
In this paper research of threshing drum’s disbalance in combine harvester is presented. Modern threshing drum of tangential type in combine harvester are made open. Central and extreme disks are mounted on the cylinder...
Assessment methodology of the stress-strain state in the heat-affected zone of austenitic alloys using a grid method
Austenitic steels and nickel-based alloys have sufficient sensitivity to hot cracking during fusion welding. Analysis of thermal stress state in the vicinity of the weld pool, including with the use of computer models to...
Lighting engineering calculation of lighting devices with given geometric dimension light sources
Power efficiency of lighting sets (LS) is determined by lighting engineering parameters of light sources and optical system of light devices that provide their basic characteristics – light distribution and efficiency. N...