PROF. DR HAB. INŻ. STANISŁAW ADAMCZAK HONORIS CAUSA DOCTORATE, UNIVERSITY OF ZILINA (SLOVAKIA)
Journal Title: Metrology and Measurement Systems - Year 2008, Vol 15, Issue 1
Abstract
On 16 November 2007, Prof. dr hab. inż. Stanisław Adamczak, Dean of the Faculty of Mechatronics and Machine Building at the Kielce University of Technology, member of the Committee on Metrology and Research Equipment and of the Committee on Machine Building of the Polish Academy of Sciences, head of the Chair of Mechanical Engineering and Metrology, received the Honoris Causa Doctorate from the University of Zilina in recognition of his outstanding teaching and research achievements in science and engineering as well as for the thirty-year cooperation with this Slovak university.
Authors and Affiliations
STEFAN MEDVECKY
Keywords
Related Articles
- EP ID EP83164
- DOI -
- Views 93
- Downloads 0
TWO-PARAMETER MEASUREMENTS AND SIGNAL CONDITIONING IN DOUBLE-CURRENT SUPPLY FOUR-TERMINAL RESISTANCE CIRCUITS
A new type of the four-terminal (4T) bridge circuit unconventionally supplied by current sources connected in parallel to opposite arms, named double current bridge (2J) is presented. It has two different outputs from bo...
A METHOD OF IDENTIFICATION OF RTS COMPONENTS IN NOISE SIGNALS
Noise signals containing two components with different distribution of current values of the noise signal, i.e. a component with Gaussian distribution and a component with non-Gaussian distribution, were analyzed. The no...
TWO-PARAMETER MEASUREMENTS AND SIGNAL CONDITIONING IN DOUBLE-CURRENT SUPPLY FOUR-TERMINAL RESISTANCE CIRCUITS
A new type of the four-terminal (4T) bridge circuit unconventionally supplied by current sources connected in parallel to opposite arms, named double current bridge (2J) is presented. It has two different outputs from bo...
EVALUATION OF CMM FOR FLATNESS MEASUREMENTS
Coordinate measuring machine (CMM) is a universal measuring instrument in dimensional metrology. However, the CMM has many sources of errors and deviations that affect its precision and accuracy. Unfortunately, the accur...
MEASUREMENT UNCERTAINTY CONTRIBUTION TO THE MLP NEURAL NETWORK LEARNING ALGORITHM APPLIED TO AERODYNAMIC EXTERNAL BALANCE CALIBRATION CURVE FITTING
The aim of this study is to fit a calibration curve to a multivariate measurement system considering uncertainty in load measurements. The experimental data are generated from the calibration of the aerodynamic external...