Quality of Service and Power Consumption Optimization on the IEEE 802.15.4 Pulse Sensor Node based on Internet of Things
Journal Title: International Journal of Advanced Computer Science & Applications - Year 2019, Vol 10, Issue 5
Abstract
The Purpose of this research is to determine the Quality of Service (QoS) Zigbee or IEEE 802.15.4 sensor Node use the indicators, i.e. the Receiver Signal Strength and PathLoss (attenuation (-dB)) at the time of communication of the sensor node end device to the sensor Router node or Coordinator sensor node (sink). The factor power consumption sensor node is important to maintain the lifetime sensor node, The Sensor data in this research is the pulse sensor. The development of the Wireless Sensor Network communication system is in multi-hop communication, with efforts to obtain low power consumption on each sensor node. This study utilizes the Routing Protocol for Low Power and Lossy Network (RPL) method with position management on the sensor node on DODAGs consequently, that the average power consumption value for each sensor node is low. The benefit of the Sensor node is to send pulse sensor data from various nodes that are interconnected at different distances in multi-hop so that power consumption and Quality of Services (QoS) can be identified from the sensor node. From the research results, the average PathLoss value of IEEE 802.15.4 or Zigbee in free space is obtained by comparing the various simulation values and field experiments at a distance of 50 m at -75.4 dB and the Average Receiver Signal Strength (RSS) with a comparison of Equation and Experiments in the field with parameters The minimum Power Transmitter is 0 dBm and the Power Transmitter is maximum +20 dBm at a distance of 50m at - 66.6 dBm. Therefore, Pulse Sensor data will be displayed on the Web Page and stored in the MySQL database using Raspberry PI 3 as the Internet Gateway.
Authors and Affiliations
Puput Dani Prasetyo Adi, Akio Kitagawa
Keywords
Related Articles
- EP ID EP578136
- DOI 10.14569/IJACSA.2019.0100518
- Views 83
- Downloads 0
Diagnosis of Parkinson’s Disease based on Wavelet Transform and Mel Frequency Cepstral Coefficients
The aim of this study presented in this paper is to determine the choice of the appropriate wavelet analyzer with the method of extraction of MFCC coefficients for an assistance in the diagnosis of Parkinson's disease. T...
A Global Convergence Algorithm for the Supply Chain Network Equilibrium Model
In this paper, we first present an auxiliary problem method for solving the generalized variational inequalities problem on the supply chain network equilibrium model (GVIP), then its global convergence is also establish...
Multi-Domain Modeling and Simulation of an Aircraft System for Advanced Vehicle-Level Reasoning Research and Development
In this paper, we describe a simulation based health monitoring system test-bed for aircraft systems. The purpose of the test-bed is to provide a technology neutral basis for implementing and evaluation of reasoning syst...
Cobit 5-Based Approach for IT Project Portfolio Management: Application to a Moroccan University
Considering the problem of the management of IT project portfolios in universities, University managers face a lot of uncertainties when prioritizing projects that make up their portfolio. The alignment with their strate...
Confidential Deterministic Quantum Communication Using Three Quantum States
A secure quantum deterministic communication protocol is described. The protocol is based on transmission of quantum states from unbiased bases and exploits no entanglement. It is composed form two main components: a qua...