RANCANG BANGUN ALAT PENGADUK ADONAN BUBUR ORGANIK KAPASITAS 7 LITER UNTUK INDUSTRI UMKM
Journal Title: SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin - Year 2018, Vol 12, Issue 2
Abstract
In today's era that is sophisticated and requires speed in the industrial world, humans are required to make and design various tools to get maximum results compared to the manual work of human strength. As an example that can be done instantly and without the need for human labor in the industrial world is the design of a slurry mixer, so that when cooking and stirring the slurry can be faster and more efficient. One of them during the stirring process can reduce the amount of production costs for employees. This study aims to plan and make a transmission and rotation system on a 7 liter capacity slurry mixer for umkm. As for the background of this research because Indonesia is one of the countries that has many SME sectors that have very large opportunities to be developed in the future. This study uses calculations for the slurry stirrer transmission system. The calculation includes an electric motor with a power of 1hp output speed of 1400 rpm with a gearbox ratio of 1:20 and with the size of the drive pulley is 2 in or 50.8 mm and the drive pulley is 4 in or 101.6 mm, the final speed is 35 rpm. The belt used is a V type A belt with a length of 914 mm. The shaft used is 25 mm in diameter with SS304 material.
Authors and Affiliations
Ahmad Yunus Nasution
Keywords
Related Articles
- EP ID EP669626
- DOI -
- Views 294
- Downloads 0
KAJI EKSPERIMENTAL PENGARUH BAFFLE PADA ALAT PENUKAR PANAS ALIRAN SEARAH DALAM UPAYA OPTIMASI SISTEM PENGERING
Heat exchangers or heat exchangers are tools used to change the temperature of the fluid or change the fluid phase by exchanging heat with another fluid. In a heat exchanger, the ability to exchange heat is largely deter...
ANALISIS PERANCANGAN ALAT KHUSUS UNTUK PEMASANGAN SUSPENSI BELAKANG PADA UNIT HD785-7
General Overhaul (GOH) is so much on the HD785-7 unit that it requires speed, accuracy, and discipline during the process so that the target can be met. Slow speed is influenced by several factors, one of which is the pr...
PENGARUH BENTUK BUKAAN TERHADAP KEKUATAN DAN GETARAN BALOK
Beam is widely used for building and mechanical structure. The beam characteristics must be able to answer the problem in field. In recent years, beam was made which compromised between stiffness and weight of beam. The...
ANALISIS POTENSI REFUSE DERIVED FUEL (RDF) DARI SAMPAH PADA TEMPAT PEMBUANGAN AKHIR (TPA) DI KABUPATEN TEGAL SEBAGAI BAHAN BAKAR INCINERATOR PIROLISIS
The garbage dumping in Tegal Regency has reached 989.8 m3/day and increasing every year. The percentage of waste in Murareja landfill is dominated by plastic waste which is 40.15%. The plastic waste will be processed by...
ANALISIS TERJADINYA SLIP PADA KOPLING DI UNIT SCANIA P 124 CB 8x4 NZ 420
In the operation of the unit whose successor does not use a hydraulic system, the role of the clutch is very important in transmitting power from the engine to the transmission. However, the clutch can only slip so that...